Product FAQ
Bookmark
Share
more..
You are not authorized to download the resource
Sort options
Sort alphabetically
Sort by relevance
Which kit size should be used for each QIAsymphony DSP Virus/Pathogen protocol?
FAQ ID -2930
View
Will mitochondrial DNA also be isolated using the DNA tissue protocols and QIAsymphony DSP DNA Mini Kit on the QIAsymphony SP?
FAQ ID -2991
View
Which sample types can be processed using the QIAsymphony PAXgene Blood RNA Protocol?
FAQ ID -2981
View
What pathways and diseases are currently covered for the qBiomarker Somatic Mutation PCR Arrays?
FAQ ID -2922
View
Why does the template for EasyXpress Disulfide Insect Kits need to have a signal sequence (such as the mellitin signal sequence as provided by the EasyXpress Linear Template Fab Kit primers)?
FAQ ID -2967
View
What sample input formats can be used for the QIAsymphony DSP Virus/Pathogen protocols?
FAQ ID -2936
View
What is the starting volume for the QIAsymphony mericon Bacteria Kit?
FAQ ID -2956
View
What is the Limit of Detection (LOD) for an ELISArray Kit?
FAQ ID -2907
View
What is the sensitivity of the assays contained on the qBiomarker Somatic Mutation PCR Arrays?
FAQ ID -2910
View
What is the linear range of the Multi-Analyte ELISArray Kits?
FAQ ID -2909
View
What are the expected DNA yields from tissue processed on the QIAsymphony SP?
FAQ ID -2990
View
What is the maximum number of GOIs that I can detect with the Type-it CNV Probe Master Mix in the same qPCR reaction?
FAQ ID -2998
View
What are the recommended lysis times for tissue samples on the QIAsymphony SP?
FAQ ID -2993
View
What are the technological principles behind somatic mutation PCR arrays and assays?
FAQ ID -2924
View
What PCR machine do I need to use to run such a qBiomarker Somatic Mutation PCR Arrays?
FAQ ID -2917
View
What method(s) do you recommend as an alternative way to validate the mutations identified on the somatic mutation PCR arrays?
FAQ ID -2920
View
What sample types can I test on the qBiomarker Somatic Mutation PCR Arrays?
FAQ ID -2919
View
What sample volumes can be processed using the QIAsymphony DSP Virus/Pathogen protocols?
FAQ ID -2929
View
What sample types should be processed with the low content (LC) and high content (HC) protocols for DNA extraction on the QIAsymphony SP?
FAQ ID -2989
View
What samples can the QIAsymphony mericon Bacteria Kit be used for?
FAQ ID -2958
View
What sample types can be processed using the QIAsymphony DSP Virus/Pathogen protocols?
FAQ ID -2928
View
Do you have stability data for RNA isolated with the QIAsymphony PAXgene Blood RNA Kit?
FAQ ID -2983
View
What sample types can be processed using the tissue protocols and the QIAsymphony DSP DNA Mini Kit?
FAQ ID -2925
View
Do you need to pre-treat food samples before DNA isolation using the QIAsymphony mericon Bacteria Kit on the QIAsymphony SP?
FAQ ID -2957
View
Do the samples require pretreatment before loading onto the instrument with the QIAsymphony PAXgene Blood RNA Protocol?
FAQ ID -2982
View
How do you decide on the qBiomarker Somatic Mutation PCR Arrays to include on the pathway arrays and disease arrays?
FAQ ID -2913
View
Do the SureSilencing shRNA Plasmids contain inducible promoters?
FAQ ID -2904
View
How many freeze-thaw cycles can the Internal Control supplied with Certal Residual DNA Detection Kits tolerate?
FAQ ID -2975
View
How many mutations can I profile per sample on the qBiomarker Somatic Mutation PCR Array?
FAQ ID -2911
View
How can I estimate the size of my protein based on the length of the respective cDNA?
FAQ ID -2952
View
How do I use the qBiomarker Somatic Mutation PCR Arrays?
FAQ ID -2923
View
Can I use the Type-it CNV kits and Reference Assays for CNV studis in mice?
FAQ ID -2997
View
Can the Certal CHO Positive Control DNA be used to create a qPCR standard for relative quantification?
FAQ ID -2979
View
Can I use lysates or tissue homogenates with the ELISArray kits?
FAQ ID -2905
View
Can the EasyXpress Linear Template Fab Kit be used to express entire IgGs?
FAQ ID -2966
View
Can I use TaqMan® Copy Number Assays from LIFE Technologies in combination with the Type-it CNV Probe kit?
FAQ ID -2999
View
Can I use the SureSilencing shRNA Plasmids with primary cells or macrophages or for injection into live animals?
FAQ ID -2902
View
Do I have to use an internal control with each QIAsymphony DSP Virus/Pathogen Kit protocol run?
FAQ ID -2932
View
Do samples require pretreatment before they are loaded onto the QIAsymphony instrument?
FAQ ID -2931
View
Can the QIAsymphony DSP Virus/Pathogen system be used for diagnostic or prognostic procedures?
FAQ ID -2939
View
Do the ELISArray Kits work on species other than human, mouse or rat?
FAQ ID -2906
View
Does the QIAsymphony mericon Bacteria Kit contain an extraction control?
FAQ ID -2961
View
Is it possible to simultaneously isolate DNA and RNA from Saliva Stabilized in RNAprotect® Saliva Reagent?
FAQ ID -2996
View
Is it possible to use templates with signal sequences with EasyXpress Disulfide E. coli Kits?
FAQ ID -2969
View
Is food DNA co-purified using the QIAsymphony mericon Bacteria Kit?
FAQ ID -2959
View
Is it possible to introduce an affinity tag using the EasyXpress Linear Template Fab Kit?
FAQ ID -2972
View
Is it possible to isolate DNA from Saliva Stabilized in RNAprotect® Saliva Reagent?
FAQ ID -2995
View
On what cyclers have Certal Residual DNA Detection Kits been validated?
FAQ ID -2978
View
On which cyclers can Certal Residual Detection Kits be used?
FAQ ID -2973
View
Should I use the SureSilencing shRNA Plasmids with the GFP, neomycin, or hygromycin, or puromycin resistance marker?
FAQ ID -2900
View
Is it possible to use the native signal sequence of antibodies with EasyXpress Disulfide Insect Kits?
FAQ ID -2968
View
Is RNA co-purified using the QIAsymphony mericon Bacteria Kit?
FAQ ID -2960
View
How much DNA does a bacterial cell contain?
FAQ ID -2947
View
How many samples can be processed with the QIAsymphony DSP Virus/Pathogen Kits?
FAQ ID -2935
View
How many reactions can be performed with one QIAsymphony mericon Bacteria Kit?
FAQ ID -2955
View
How should the samples be stored before purification of RNA with the QIAsymphony PAXgene Blood RNA Protocol?
FAQ ID -2984
View
How should the samples be stored before purification with the QIAsymphony DSP Virus/Pathogen Kits?
FAQ ID -2934
View
If a cycler from Applied Biosystems is used in combination with the Certal Residual DNA Detection Kit, should dye calibration for MAX be performed?
FAQ ID -2977
View
How much sample is required for each well for an ELISArray Kit?
FAQ ID -2908
View
How much starting material can be used with the QIAsymphony DSP DNA Mini Kit on the QIAsymphony SP?
FAQ ID -2927
View
3198 - What is the optimal DNA concentration for the Investigator DIPlex Kit?
View
3194 - What DNA fragment sizes are required for the Investigator DIPlex kit?
View
3195 - Where can I find the Population Data for the Investigator DIPlex kit?
View
3196 - What is the DIPsorter Freeware?
View
3188 - How many His residues are required for successful purification on Ni-NTA resins?
View
3190 - What is the smallest elution volume for RNeasy Mini Spin column?
View
Why does the QIAcube sometimes fail to pick up the tips or pick up wrong tips?
FAQ ID -3131
View
The kit says I can use up to 30mg of tissue. When I used 15mg I got a higher yield than when I used 30mg. Why?
FAQ ID -3117
View
I want to purify RNA from heart tissue. What is the best kit to use?
FAQ ID -3116
View
Why does the upper aqueous phase look pinkish when purifying RNA from fatty tissue?
FAQ ID -3118
View
Is it possible to partially use RNeasy 96 plates and use the plate multiple times?
FAQ ID -3124
View
Can I use the QIAGEN deparaffinization solution with the IDH 1/2 RGQ PCR kit?
FAQ ID -3100
View
Can I use stained slide materials with IDH 1/2 RGQ PCR kit?
FAQ ID -3101
View
What is the standard format for Flexiplate siRNAs delivery?
FAQ ID -3104
View
How many transfections can be performed with Flexiplate siRNAs?
FAQ ID -3105
View
Where to look for ordering Custom siRNAs online?
FAQ ID -3106
View
What is the difference between HiPerFect and HiPerFect HTS?
FAQ ID -3108
View
What are the miScript Controls that can be used with miScript HiSpec Buffer or miScript HiFlex Buffer?
FAQ ID -3111
View
What is the amplicon size of the PCR product when using the miScript primer assay?
FAQ ID -3156
View
What is the difference between EpiTect Bisulfite Kit and EpiTect Plus Bisulfite Kit?
FAQ ID -3167
View
What are the stopping points in the QIAamp protocol?
FAQ ID -3157
View
What are the benefits of PyroMark Q24 Advanced versus PyroMark Q24?
FAQ ID -3158
View
Do you have data on the DNA yield at different incubation time for the Repli-G Kits?
FAQ ID -3113
View
Is it possible to upgrade existing PyroMark Q24 instruments to PyroMark Q24 Advanced or do I have to purchase a new instrument?
FAQ ID -3162
View
Is it possible to run therascreen mutation or therascreen Pyro kits on PyroMark Q24 Advanced system?
FAQ ID -3161
View
Which operating system is compatible with PyroMark Q24 Advanced application software?
FAQ ID -3164
View
What is the adapted annealing protocol for PyroMark Q24 Advanced procedure?
FAQ ID -3166
View
What is the miRNA yield from the miRNeasy Serum/Plasma Kit?
FAQ ID -3171
View
What is the RNA size distribution recovered from the miRNeasy Serum/Plasma Kit?
FAQ ID -3172
View
What could be a reason for higher viscosity of PCR reaction with STR Plus chemistry?
FAQ ID -3176
View
Does QIAGEN provide template files for GeneMapper® 5 software?
FAQ ID -3177
View
Can Rotor-Gene Reports be modified?
FAQ ID -3184
View
What is the best way to ensure the Rotor-Disc is properly sealed when using the Heat Sealer?
FAQ ID -3179
View
What to do if there is a loss of communication for the Rotor-Gene Q?
FAQ ID -3180
View
Aside from the OTV test, what other maintenance should be done for the Rotor-Gene Q?
FAQ ID -3181
View
Are the miRNA Target Protector & miRNA mimic bench tested? Any guarantee?
FAQ ID - 3186
View
3187 - Why does the Ni-NTA resin turn reddish-brown after mixing with the lysates?
View
3191 - Is the Allprep DNA Mini Spin Column the same as the gDNA eliminator column? Can I interchange these columns?
View
3199 - Which species can be used with the GeneRead rRNA depletion kit?
View
3192 - Is QIAGEN Protease compatible with Buffer ATL?
View
What is the bacterial ribosomal RNA recommended to use in the miRNeasy Serum/Plasma Protocol?
FAQ ID -3173
View
3193 - Where can I get an RNase-free syringe that is recommended for reconstituting QIAGEN's RNase-free DNase (cat. no. 79254)?
View
Would co-transfection with the plasmid be expected to increase/decrease the transfection efficiency significantly?
FAQ ID -3136
View
How can I know whether there is any genomic DNA present in my purified plasmid?
FAQ ID -3134
View
How do I know whether my miRNA has been successfully purified and how much is expected?
FAQ ID -3135
View
Is it possible to use RNAprotect Cell Reagent to stabilize buffy coat?
FAQ ID -3139
View
Has QIAGEN ever tested Proteinase K treatment for a time period longer than overnight?
View
Is RNAprotect also suitable for the stabilization of miRNA?
FAQ ID -3143
View
Does RNAprotect affect morphology of tissues?
FAQ ID -3142
View
Are miScript primer assays bench-validated?
FAQ ID -3145
View
What is the maximum cDNA length that can be synthesized by QuantiTect Reverse Transcription Kit?
FAQ ID -3146
View
Why does the DNeasy mericon Food extraction kit use a QIAquick column and not DNeasy column?
FAQ ID -3148
View
What are the minimal and maximum fragment sizes for the QIAquick column in the mericon DNeasy kit?
FAQ ID -3147
View
Does RNase-free DNase I affect the isolation of dsRNA?
FAQ ID -3153
View
Can single-stranded DNA be removed by gDNA Eliminator columns?
FAQ ID -3152
View
How is total RNA purified with RNeasy kits free of genomic DNA contamination?
FAQ ID -3154
View
Is it possible to quantify protein content in RLT lysates?
FAQ ID -3155
View
What primary cell lines have been tested with HiPerFect Transfection Reagent?
FAQ ID -3137
View
Is it possible to use the protein resuspended in ALO buffer for downstream BCA assay and Bradford assay?
FAQ ID -3138
View
What are the miScript Controls that can be used with miScript HiFlex Buffer ONLY?
FAQ ID -3112
View
How long can I store an RLT lysate?
FAQ ID -3115
View
Do you have a protocol for the isolation of genomic DNA from yeast/fungi directly from Blood?
FAQ ID -3150
View
Is there cross talk between channels in the Rotor-Gene Q?
FAQ ID -3185
View
3197 -Where can I find the Population Data for the Investigator HDplex kit?
View
Can QIAzol aqueous phase be used with the gDNA eliminator columns in RNeasy Plus mini kit?
FAQ ID -3151
View
What is in the HiSpec Buffer that selectively synthesizes cDNA from mature miRNAs ONLY?
FAQ ID -3168
View
What is the optimal DNA concentration for the Investigator ESSplex Plus Kit?
FAQ ID -2646
View
What is the maximum DNA input volume that can be used in the Investigator ESSplex Plus Kit?
FAQ ID -2645
View
What is the correct matrix to use with ESSplex Plus?
FAQ ID -2647
View
Why do I see low, poor, or sub-standard amplification efficiency in my qRT-PCR assay?
FAQ ID -2695
View
What is the difference between adding the Internal Control (IC) template used in the QuantiFast Pathogen PCR +IC Kit and the QuantiFast Pathogen RT-PCR +IC Kit to the amplification reaction versus adding the IC template at the extraction step?
FAQ ID -2600
View
Is the QuantiFast SYBR Green PCR Kit compatible with the ViiA7 cycler from Applied Biosystems?
FAQ ID -2652
View
What are the most reliable methods for preparing high-quality RNA from cell or tissue samples, for use in gene expression analysis experiments?
FAQ ID -2657
View
Which settings for the filter set Any5Dye have to be adjusted before running the spectral calibration on the Investigator ESSplex Plus?
FAQ ID -2649
View
What should the cycler set-up be for a duplex reaction with the pathogen assay (FAM) and the Internal Control assay (MAX) on ABI instruments, when using the QuantiFast Pathogen PCR +IC Kit or the QuantiFast Pathogen RT-PCR +IC Kit?
FAQ ID -2610
View
What should the cycler set-up be for a duplex reaction with the pathogen assay (FAM) and the Internal Control assay (MAX) on Mx instruments from Stratagene (Agilent), when using the QuantiFast Pathogen PCR +IC Kit or the QuantiFast Pathogen RT-PCR +IC Kit?
FAQ ID -2609
View
What should I do if I suspect that my RNA preparation contains RNase contamination?
FAQ ID -2661
View
What real-time cycler should I use for my qPCR experiments?
FAQ ID -2670
View
Which DNA/RNA extraction kits were tested in combination with the QuantiFast Pathogen PCR +IC Kit and the QuantiFast Pathogen RT-PCR +IC Kit?
FAQ ID -2606
View
Which filter set should be used with the Investigator ESSplex Plus?
FAQ ID -2648
View
What should the Rotor-Gene Q cycler settings be for a duplex reaction with the pathogen assay (FAM) and the Internal Control assay (MAX), when using the QuantiFast Pathogen PCR +IC Kit or the QuantiFast Pathogen RT-PCR +IC Kit?
FAQ ID -2608
View
What testing should be performed to assess the quality of an RNA sample?
FAQ ID -2660
View
For the QuantiFast Pathogen RT-PCR +IC kit, does the Internal Control also control for the reverse transcription reaction?
FAQ ID -2601
View
Have primer sequences been changed compared to the former Investigator ESSplex Plus assay?
FAQ ID -2643
View
Do we have data on long term stability and storage of DNA purified on BioRobot M48?
FAQ ID -2611
View
Following thermal cycling, reaction volume has evaporated from some of the wells of my qPCR assay plate. What should I do?
FAQ ID -2683
View
How can I predict the percent qPCR signal due to contaminating DNA, for a given qPCR assay, and its matching NRT control?
FAQ ID -2688
View
How can I ensure that reaction volume is not lost due to evaporation during thermal cycling?
FAQ ID -2679
View
How can I determine whether amplification occurs from mRNA-derived cDNA or from genomic DNA contamination?
FAQ ID -2687
View
Can the Internal Control DNA or RNA be added directly to the sample?
FAQ ID -2602
View
Do the QuantiFast Pathogen PCR +IC Kit and the QuantiFast Pathogen RT-PCR +IC Kit contain ROX in the master mix?
FAQ ID -2605
View
Are primers available that only detect mitochondrial DNA encoded genes and not nuclear genomic DNA encoded genes?
FAQ ID -2680
View
Do I need to run a standard curve before the actual PCR array experiment?
FAQ ID -2664
View
Can the PCR protocol be run on different PCR endpoint cyclers for the Investigator ESSplex Plus?
FAQ ID -2640
View
Does the amount of Internal Control to be spiked into the lysis buffer or lysate depend on the elution volume only?
FAQ ID -2604
View
May I try the data analysis tool without using your PCR array kit?
FAQ ID -2698
View
Does the Investigator ESSplex Plus Kit assay contain an internal control?
FAQ ID -2642
View
Is the QuantiFast Multiplex PCR +R Kit compatible with the ViiA7 cycler from Applied Biosystems?
FAQ ID -2653
View
Is the QuantiFast Probe PCR +ROX Vial Kit compatible with the ViiA7 cycler from Applied Biosystems?
FAQ ID -2651
View
What does the ESSplex Plus kit contain?
FAQ ID -2644
View
Is the Fast Reaction Mix ready to use in the Investigator ESSplex Plus?
FAQ ID -2639
View
Is it good to pool multiple RNA replicates to detect expression changes that are consistently reproducible?
FAQ ID -2663
View
How important is the RNA purification process, for obtaining reliable qRT-PCR results?
FAQ ID -2655
View
Is it possible to extend the number of PCR cycles in the Investigator ESSplex Plus Kit to increase sensitivity?
FAQ ID -2641
View
Is a special processing protocol needed?
FAQ ID -2523
View
Is it possible to archive PAXgene Tissue fixed, paraffin-embedded (PFPE) tissue blocks?
FAQ ID -2524
View
The disruption of my sample worked well with the TissueLyser LT, but I am not satisfied with the RNA yield. What do you suggest?
FAQ ID -2555
View
What are the dimensions of the TissueLyser LT?
FAQ ID -2545
View
What is the average RNA yield from PAXgene Tissue fixed, paraffin-embedded (PFPE) tissue?
FAQ ID -2534
View
On which cyclers can the QuantiFast Pathogen PCR +IC Kit or the QuantiFast Pathogen RT-PCR +IC Kit be used?
FAQ ID -2596
View
What are the storage conditions for the mericon Assay kits?
FAQ ID -2540
View
What is in the elution buffer in the PAXgene Bone Marrow RNA kit?
FAQ ID -2511
View
Is it possible to microdissect PAXgene Tissue fixed, paraffin-embedded (PFPE) and PAXgene Tissue fixed, cryo-embedded (PFCE) tissues?
FAQ ID -2531
View
Is the performance of the HiPerFect HTS Reagent affected if it has accidentally been stored at°C?
-20
View
Is it possible to embed PAXgene Tissue fixed and stabilized samples in Optimal Cutting Temperature (OCT) medium for freezing?
FAQ ID -2525
View
Is the morphology after H&E staining comparable to formalin-fixed samples?
FAQ ID -2526
View
What RNA yields are expected with the PAXgene Bone Marrow RNA System?
FAQ ID -2506
View
What is the maximum tissue size that can be fixed in a PAXgene Tissue Container?
FAQ ID -2518
View
What is the RT-PCR performance of RNA purified from PAXgene Tissue fixed, paraffin-embedded (PFPE) and PAXgene Tissue fixed, cryo-embedded (PFCE) tissue compared to RNA from snap frozen or formalin-fixed, paraffin-embedded (FFPE) tissue?
FAQ ID -2538
View
What is the expected amplicon size when using the mericon Assay kits?
FAQ ID -2544
View
What is the typical amount of tissue used for disruption with the TissueLyser LT?
FAQ ID -2552
View
What is the longest period you recommend to leave out the dilute HiPerFect HTS at RT before use?
FAQ ID -2560
View
What kind of sample tubes are recommended to use with the TissueLyser LT?
FAQ ID -2553
View
What is the purity of nucleic acids extracted with the PAXgene Tissue kits?
FAQ ID -2533
View
Can the PAXgene Bone Marrow RNA System be used to isolate genomic DNA or viral RNA and DNA?
FAQ ID -2507
View
Can the PAXgene Bone Marrow RNA System be used with animal bone marrow or with blood samples?
FAQ ID -2501
View
Can the PAXgene RNA stabilization solution/bone marrow mixture from the PAXgene Bone Marrow RNA Tube be disposed of by adding bleach?
FAQ ID -2515
View
Can sections of PAXgene Tissue fixed, paraffin-embedded (PFPE) tissue be used for other histochemical staining techniques, such as PAS?
FAQ ID -2530
View
Can the PAXgene Bone Marrow RNA System be used for other human body fluids than bone marrow samples or cultured cells of human origin?
FAQ ID -2502
View
Can the sample tubes and the TissueLyser LT Adapter be cooled with liquid nitrogen?
FAQ ID -2549
View
Can the TissueLyser LT Adapter be removed for cleaning?
FAQ ID -2546
View
Can the samples on the TissueLyser LT be protected from degradation of nucleic acids or proteins?
FAQ ID -2548
View
When using the QuantiFast Pathogen PCR +IC Kit or the QuantiFast Pathogen RT-PCR +IC Kit, what should the fluorescent label of the probe be for the customer-defined assay to detect the pathogen?
FAQ ID -2594
View
When using HiPerFect HTS Reagent is it necessary to optimize amount of siRNA and transfection reagent?
FAQ ID -2556
View
What sample numbers can be processed on the TissueLyser LT?
FAQ ID -2547
View
What size bead should I use for tougher samples with the TissueLyser LT?
FAQ ID -2554
View
When performing the Internal Control assay for the QuantiFast Pathogen PCR +IC Kit and the QuantiFast Pathogen RT-PCR +IC Kit, what channel or filter can be used to detect MAX?
FAQ ID -2597
View
Why is the fluorescence signal of the Internal Control on my Rotor-Gene Q very low?
FAQ ID -2574
View
Can specific types of white blood cells be enriched from a PAXgene Bone Marrow RNA Tube prior to the RNA isolation?
FAQ ID -2508
View
Can bone marrow aliquots other than 2 mL be pipetted into the PAXgene Bone Marrow RNA Tube?
FAQ ID -2503
View
Are the Internal Controls used in the QuantiFast Pathogen PCR +IC Kit and the QuantiFast Pathogen RT-PCR +IC Kit homologous to a known target?
FAQ ID -2598
View
Can I use water to elute the RNA in the PAXgene Bone Marrow RNA Kit?
FAQ ID -2512
View
Can PAXgene Tissue fixed, paraffin-embedded (PFPE) tissue be used for in situ hybridization?
FAQ ID -2529
View
Can bone marrow from leukemia patients with elevated numbers of white blood cells be processed with the PAXgene Bone Marrow RNA System?
FAQ ID -2510
View
Can HiPerFect HTS be used for miRNA?
FAQ ID -2561
View
Can HiPerFect HTS Reagent be used for transfecting shRNAs?
FAQ ID -2559
View
How long does the sample disruption with the TissueLyser LT take?
FAQ ID -2550
View
How many times can the Internal Controls used in the QuantiFast Pathogen PCR +IC Kit and the QuantiFast Pathogen RT-PCR +IC Kit be freeze-thawed?
FAQ ID -2599
View
How long can I store the dilutions of the Control DNA Z1 standards at 2°C?
-8
View
How long can primer and probes from the mericon Assay kits be kept at°C once reconstituted?
-20
View
How should the PAXgene Bone Marrow RNA Tubes be frozen after collection and for how long?
FAQ ID -2505
View
I routinely heat an aliquot of the RNA eluate prior to my RT reaction. Do I still need to heat the eluate after the PAXgene Bone Marrow RNA preparation?
FAQ ID -2513
View
How much time may the aspirated bone marrow sample be allowed to incubate before pipetting it into the PAXgene Bone Marrow RNA Tube?
FAQ ID -2504
View
Do you have FACS or Fluoro-Microscopy data using HiPerFect HTS Reagent for delivery of siRNA?
FAQ ID -2557
View
How is stability and performance of these mericon Assay kits guaranteed?
FAQ ID -2542
View
How are the supernatants resulting from the first two spin steps of the PAXgene Bone Marrow RNA kit purification procedure disposed?
FAQ ID -2516
View
What are typical yields of bisulfite converted DNA when using the EpiTect Plus Bisulfite Kits?
FAQ ID -2408
View
What batch sizes can be selected with the PAXgene Blood RNA MDx Kit?
FAQ ID -2491
View
What are the labels of the probe which is used in the Internal Control Assay for detection of the IC?
FAQ ID -2449
View
What is the correct matrix and filter/settings to be used on the Investigator ID plex kit?
FAQ ID -2405
View
What is the detection limit for the QuantiFast Pathogen + IC kits?
FAQ ID -2453
View
What is the batch size of the QIASymphony Rotor-Gene Q and how many PCR´s can be processed per assay module run?
FAQ ID -2433
View
What does the Investigator IDplex Kit contain?
FAQ ID -2402
View
In which solution can I keep my protein for the NexTal Cubic Phase kits?
FAQ ID -2416
View
Is it possible to process samples on the AS-module while SP is running?
FAQ ID -2435
View
Is barcode reading supported by QS-RGQ?
FAQ ID -2437
View
What is the difference between QuantiTect Virus Kit and the new QuantiFast Pathogen +IC Kits?
FAQ ID -2448
View
Is there a critical step during upfront sample handling when using the PAXgene Blood RNA MDX kit?
FAQ ID -2493
View
Which EpiTect Bisulfite Plus kit do you recommend for blood samples, cells, and tissues?
FAQ ID -2411
View
Which thermal cyclers are validated for use with the Investigator IDplex Kit?
FAQ ID -2403
View
What is the nature of the Internal Control in the QuantiFast Pathogen + IC kit?
FAQ ID -2450
View
Where can I find general information about RT-PCR and PCR arrays such as information about sample preparation, reverse transcription, quantitative PCR, real-time PCR, and PCR arrays?
FAQ ID -2446
View
What is the maximum number of batches for the QIAsymphony PAXgene Blood RNA protocol for a single run?
FAQ ID -2498
View
Why should I work with diluted or undiluted screens?
FAQ ID -2419
View
Why should I use the EpiTect Plus FFPE Bisulfite Kit instead of isolating FFPE DNA first and then doing the bisulfite conversion?
FAQ ID -2412
View
What is the difference between sponge, cubic and lamellar phase of the NeXtal CubicPhase crystallisation?
FAQ ID -2420
View
Why do I get different results for the loci SE33 if I analyze the same sample using the Investigator Nonaplex ESS Kit or Investigator Triplex AFS QS Kit?
FAQ ID -2401
View
What is the elution volume for all CE-marked artus QS-Rotor-Gene Q assays?
FAQ ID -2432
View
Where are the somatic mutations published?
FAQ ID -2429
View
What should be the concentration of my protein for the Nextal Cubic Phase products?
FAQ ID -2417
View
What kind of control samples should I use for the particular iPSC-qBiomarker Arrays I have ordered?
FAQ ID -2441
View
What is the optimal DNA input and cycling conditions with the Investigator IDplex kit?
FAQ ID -2404
View
What is the range indicated by 'Std. Error' on 'Results' page?
FAQ ID -2456
View
Can the PAXgene Blood RNA MDx Kit be used with both the BioRobot Universal System and the BioRobot MDx?
FAQ ID -2489
View
Can the Internal Controls be ordered separately in the QuantiFast Pathogen + IC kit for use during purification?
FAQ ID -2451
View
Can the PAXgene Blood RNA MDx Kit be used for diagnostic or prognostic procedures?
FAQ ID -2488
View
Can the QIAsymphony PAXgene Blood RNA System be used for diagnostic or prognostic procedures?
FAQ ID -2496
View
Can the PAXgene Blood miRNA System be used for diagnostic or prognostic procedures?
FAQ ID -2494
View
At what temperature can I perform the NexTal Cubic Phase experiment and incubate the plate?
FAQ ID -2415
View
How are the different mutations for a single gene normalized on the qBiomarker Somatic Mutation PCR array?
FAQ ID -2428
View
Are the primer sets different for the Investigator Nonaplex ESS Kit and Investigator Hexaplex ESS Kit where the loci are the same?
FAQ ID -2400
View
How can I check DNA sample quality before using the Somatic Mutation PCR Arrays & Assays?
FAQ ID -2430
View
How much DNA starting sample is needed for analysis with a Somatic Mutations PCR Array? And Assay?
FAQ ID -2431
View
How do I get started using the NeXtal CubicPhase kits?
FAQ ID -2413
View
Are the primer sets contained in the Investigator IDplex kit the same as in competitor kits?
FAQ ID -2407
View
How pure should my protein be with the NexTal CubicPhase kits?
FAQ ID -2414
View
How many samples can be processed with the QIAsymphony PAXgene Blood RNA Kit?
FAQ ID -2497
View
How many fragments are contained within the size standard BTO?
FAQ ID -2406
View
How many samples can be processed with the PAXgene Blood RNA MDx Kit?
FAQ ID -2490
View
In the REST software, what is the range indicated by 'Std. Error' on the 'Results' page?
FAQ ID -2455
View
How many PAXgene Blood RNA Tubes can be processed per PAXgene 96 Blood RNA Kit well plate?
FAQ ID -2485
View
If less than 48/96 samples are being processed, is it possible to leave positions empty with the PAXgene Blood RNA MDx Kit?
FAQ ID -2492
View
How does the DNA Protection work in the EpitTect Bisulfite kits?
FAQ ID -2410
View
How is the hypothesis test performed in the REST software?
FAQ ID -2459
View
How do I determine if my gene expression results are statistically significant in the REST software?
FAQ ID -2458
View
How many different genes and gene mutations are on a Somatic Mutation PCR Array?
FAQ ID -2427
View
How long does a QuantiFast Pathogen + IC run take on the Rotor-Gene Q?
FAQ ID -2452
View
How do I know in which phase of my NeXtal CubicPhase cristallisation experiment I am?
FAQ ID -2421
View
How great is the enrichment of miRNA when using the dedicated PAXgene Blood miRNA Kit compared to the PAXgene Blood RNA Kit?
FAQ ID -2495
View
How do I harvest the crystals from meso phase? Are special tools needed?
FAQ ID -2422
View
View
Why are two reagents used in the PAXgene Tissue System?
FAQ ID -3022
View
Have primer sequences in the Investigator IDplex GO! Kit been changed compared to the Investigator IDplex Plus assay?
FAQ ID -3092
View
Is it possible to increase the amount of sample to obtain higher signals using the Investigator IDplex GO! Kit?
FAQ ID -3090
View
Do you recommend using indicator cards for buccal cells on FTA with Investigator IDplex GO! Kit?
FAQ ID -3095
View
Can the Investigator IDplex GO! PCR protocol be run on different PCR endpoint cyclers?
FAQ ID -3089
View
Do I need to evaluate optimal PCR cycle numbers for the Investigator IDplex GO! Kit with my samples?
FAQ ID -3091
View
Can additional positive controls be used for the Investigator IDplex GO! Kit?
FAQ ID -3094
View
Can the allelic ladder of the Investigator IDplex Plus Kit be used for analysis of Investigator IDplex GO! Kit?
FAQ ID -3093
View
What is the maximum size of tissue that can be fixed in a PAXgene Tissue FIX Container (50 ml)?
FAQ ID -3024
View
5. What is the maximum size of the tissue sample that can be fixed in a PAXgene Tissue Container?
FAQ ID -3023
View
What happens if a tissue sample larger than 20 x 20 x 20 mm is used for fixation with the PAXgene Tissue FIX Container (50 ml)?
FAQ ID -3025
View
How long is the fixation time when using PAXgene Tissue FIX Container?
FAQ ID -3026
View
Is it possible to fix over a weekend?
FAQ ID -3027
View
How long can a tissue specimen stay in the PAXgene Tissue STABILIZER?
FAQ ID -3028
View
What is the minimum incubation time required when using the PAXgene Tissue STABILIZER?
FAQ ID -3029
View
Is it possible to integrate the PAXgene Tissue STABILIZER into the processing?
FAQ ID -3037
View
Is it possible to archive PAXgene Tissue fixed, paraffin-embedded (PFPE) tissue?
FAQ ID -3038
View
Is the morphology after H&E staining comparable to formalin-fixed samples?
FAQ ID -3039
View
Are immunohistochemistry (IHC) assays developed for formalin-fixed, paraffin-embedded (FFPE) compatible with PAXgene Tissue fixed, paraffin-embedded (PFPE) tissue?
FAQ ID -3040
View
Is it possible to use formalin-fixed, paraffin-embedded (FFPE) kits and protocols for extraction of biomolecules from PAXgene Tissue fixed, paraffin-embedded (PFPE) tissue?
FAQ ID -3043
View
is the purity of nucleic acids isolated with the PAXgene Tissue Kits?
FAQ ID -3044
View
What is the integrity of RNA from PAXgene Tissue fixed, paraffin-embedded (PFPE) tissue?
FAQ ID -3046
View
What is the average RNA yield from PAXgene Tissue fixed, paraffin-embedded (PFPE) tissue?
FAQ ID -3045
View
What is the RT-PCR performance of RNA purified from PAXgene Tissue fixed, paraffin-embedded (PFPE) tissue compared to RNA from snap frozen or formalin-fixed, paraffin-embedded (FFPE) tissue?
FAQ ID -3050
View
What is the PCR performance of DNA purified from PAXgene Tissue fixed, paraffin-embedded (PFPE) tissue compared to DNA from snap frozen or formalin-fixed, paraffin-embedded (FFPE) tissue?
FAQ ID -3051
View
How can proteins purified from PAXgene Tissue fixed, paraffin-embedded (PFPE) tissue be analyzed?
FAQ ID -3052
View
What is the DNA integrity from PAXgene Tissue fixed, paraffin-embedded (PFPE) tissue?
FAQ ID -3047
View
Does the PAXgene Tissue RNA Kit co-purify small RNAs?
FAQ ID -3048
View
How can I extract proteins from PAXgene Tissue fixed, paraffin-embedded (PFPE) tissue?
FAQ ID -3049
View
Can PAXgene Tissue fixed, paraffin-embedded (PFPE) tissue be used for in situ hybridization?
FAQ ID -3042
View
What are the typical yields obtained from Buccal swabs on BioSprint 96?
FAQ ID -3071
View
Can I use a USB drive to transfer protocols to BioSprint?
FAQ ID -3072
View
Is the Fast Reaction Mix ready to use in the Investigator IDplex GO?
FAQ ID -3087
View
Is it possible to manually process PAXgene Tissue treated samples without using an automated processor?
FAQ ID -3036
View
Are PAXgene Tissue Containers suitable for long term-storage at freezing temperatures?
FAQ ID -3030
View
Is it possible to process formalin-fixed and PAXgene Tissue fixed samples together in one run?
FAQ ID -3033
View
Is it necessary to clean a processor normally used for formalin-fixed tissue before using it with PAXgene Tissue fixed tissue?
FAQ ID -3034
View
Is a special processing protocol needed?
FAQ ID -3035
View
Can sections of PAXgene Tissue fixed, paraffin-embedded (PFPE) tissue be used for other histochemical staining techniques, such as PAS?
FAQ ID -3041
View
What is the maximum DNA input volume that can be used in the Investigator IDplex Plus Kit?
FAQ ID -3014
View
What is the optimal sample DNA concentration for the Investigator IDplex Plus Kit?
FAQ ID -3015
View
What is the optimal sample DNA concentration for the Investigator ESSplex SE Plus Kit?
FAQ ID -3028
View
What is the correct matrix to use with Investigator ESSplex SE Plus Kit?
FAQ ID -3029
View
What is the maximum DNA input volume that can be used in the Investigator ESSplex SE Plus Kit?
FAQ ID -3027
View
What is the correct matrix to use with Investigator IDplex Plus Kit?
FAQ ID -3016
View
Which settings for the filter set Any5Dye must be adjusted before running the spectral calibration for Investigator ESSplex SE Plus Kit?
FAQ ID -3031
View
Which settings for the filter set Any5Dye must be adjusted before running the spectral calibration for Investigator IDplex Plus Kit?
FAQ ID -3018
View
Which filter set should be used with Investigator IDplex Plus Kit?
FAQ ID -3017
View
Which filter set should be used with Investigator ESSplex SE Plus Kit?
FAQ ID -3030
View
Where can I find the template files for the Investigator IDplex Plus Kit?
FAQ ID -3019
View
Does the Investigator IDplex Plus assay contain an internal control?
FAQ ID -3011
View
What does the Investigator IDplex Plus Kit contain?
FAQ ID -3013
View
Have primer sequences of the Investigator ESSplex SE Plus Kit been changed compared to the former Investigator ESSplex SE assay?
FAQ ID -3025
View
Does the Investigator ESSplex SE Plus assay contain an internal control?
FAQ ID -3023
View
Are the multicopy reference assays for Type-it CNV PCR +qC Kits and the qBiomarker assays the same?
FAQ ID -3000
View
Can the PCR protocol of the Investigator ESSplex SE Plus Kit be run on different PCR endpoint cyclers?
FAQ ID -3021
View
Can the PCR protocol of the Investigator IDplex Plus Kit be run on different PCR endpoint cyclers?
FAQ ID -3009
View
Is the Fast Reaction Mix of the Investigator IDplex Plus Kit ready to use?
FAQ ID -3008
View
Have primer sequences of the Investigator IDplex Plus Kit been changed compared to the former Investigator IDplex assay?
FAQ ID -3012
View
Is it possible to extend the number of PCR cycles to increase sensitivity of the Investigator IDplex Plus Kit?
FAQ ID -3010
View
Is the Fast Reaction Mix of the Investigator ESSplex SE Plus Kit ready to use?
FAQ ID -3020
View
What does the Investigator ESSplex SE Plus Kit contain?
FAQ ID -3026
View
How do I clean up RNA preparations containing miRNA?
FAQ ID -3002
View
Is it possible to extend the number of PCR cycles to increase sensitivity of the Investigator ESSplex SE Plus Kit?
FAQ ID -3022
View
What is the fixation method used in the PAXgene Tissue System?
FAQ ID -3019
View
What does PAXgene Tissue FIX contain?
FAQ ID -3020
View
Can I perform the IDH 1/2 RGQ PCR test with slides containing less than 40% tumor cells?
FAQ ID -3098
View
Can the MaXtract High Density Tube be used with QIAzol to isolate RNA?
FAQ ID -1304
View
What volume of bacterial culture can be processed using the QuickLyse Miniprep Kit?
FAQ ID -1357
View
What factors determine if denatured proteins accumulate underneath, or inside the gel of the MaXtract Low and High Density Tubes?
FAQ ID -1312
View
I have a Human Druggable Genome siRNA Set V2.0. Can I reorder the siRNAs from this set?
FAQ ID -1366
View
If both MaXtract Low Density and High Density is suitable for an application, which type is preferable to use?
FAQ ID -1310
View
How will service work carried out on my QIAGEN BioRobot be documented?
FAQ ID -1331
View
If I cannot order FlexiPlate siRNA online, how do I order?
FAQ ID -1371
View
What information about my gene or siRNA do I need to order FlexiPlate siRNA?
FAQ ID -1365
View
Is it possible to use MaXtract for an organic extraction with a mixture of phenol and BCP (1 bromine chlorpropane)?
-3
View
What information is provided with FlexiPlate siRNAs?
FAQ ID -1363
View
Is it possible to elute plasmid DNA obtained with the QuickLyse Miniprep Kit in nuclease-free water?
FAQ ID -1355
View
Which formats are available for FlexiPlate siRNA?
FAQ ID -1358
View
When isolating DNA from plant cells using CTAB, should MaXtract Low or High Density be used?
FAQ ID -1308
View
Which parts are exchanged during a Preventive Maintenance visit for my QIAGEN BioRobot?
FAQ ID -1334
View
Which controls can I choose for FlexiPlate siRNA?
FAQ ID -1368
View
Which density gel type is contained in the yellow or green MaXtract Tubes?
FAQ ID -1315
View
What is the composition of FlexiPlate siRNA buffer?
FAQ ID -1361
View
Which software updates are included in a Premium Cover Agreement for my QIAGEN Instrument?
FAQ ID -1336
View
Can MaXtract tubes be autoclaved prior to use?
FAQ ID -1305
View
Can I reduce the amount of starting material below 10 ng when using the REPLI-g UltraFast Mini Kit?
FAQ ID -1325
View
Can I reduce the reaction time to e.g., 30 minutes, when using the REPLI-g UltraFast Mini Kit?
FAQ ID -1326
View
Can I use any type of DNA extraction method to purify template DNA for amplification using the REPLI-g Mitochondrial DNA Kit?
FAQ ID -1321
View
Can several extraction steps be performed in the same MaXtract tube?
FAQ ID -1302
View
Can a phenol-chloroform ratio different from 1:1 also be used with MaXtract Low and High Density?
FAQ ID -1309
View
Can DNA isolated with MaXtract tubes be used for downstream applications such as restriction digestion, labeling, blotting, PCR, and automated sequencing?
FAQ ID -1303
View
Can I amplify mitochondrial DNA directly from whole blood or cells using the REPLI-g Mitochondrial DNA Kit?
FAQ ID -1319
View
Can I order Alexa Fluor labeled controls with FlexiPlate siRNA?
FAQ ID -1369
View
Can HP Validated siRNAs be ordered on the FlexiPlate?
FAQ ID -1367
View
Can frozen sample material pulverized in liquid nitrogen be directly added to MaXtract tubes?
FAQ ID -1301
View
Can I also screen large constructs like BACs, fosmids, and cosmids using the QIAGEN PlasmidAmp Kit?
FAQ ID -1337
View
How much REPLI-g amplified mitochondrial DNA should be used in a subsequent PCR reaction?
FAQ ID -1320
View
Do mutations in the target mitochondrial DNA prevent primer binding, resulting in no DNA amplification with the REPLI-g Mitochondrial DNA Kit?
FAQ ID -1323
View
Do you have stability data for genomic DNA isolated with the BioSprint Kits?
FAQ ID -1318
View
Do you have stability data for genomic DNA isolated with the Flexigene DNA Kit?
FAQ ID -1317
View
Do customers have to comply with the in vitro diagnostics (IVD) guideline?
FAQ ID -1381
View
Does the addition of sample and organic solution to the MaXtract Tubes require a specific pipetting sequence?
FAQ ID -1307
View
How can I upload my gene list for FlexiPlate siRNA to GeneGlobe?
FAQ ID -1364
View
How does a Service Support Agreement provide defined budgeting for maintaining my BioRobot?
FAQ ID -1330
View
How can I ensure optimal performance of my QIAGEN instrument?
FAQ ID -1329
View
Should a negative control without the addition of IC be included in PCR run?
FAQ ID -1400
View
Is it possible to purify viral RNA using FastLane Cell RT-PCR Kits?
FAQ ID -1484
View
Why is the activation time for HotStarTaq Plus Polymerase in the QuantiFast SYBR Green Kits different from that for QuantiFast Probe Kits?
FAQ ID -1449
View
Why is the RT step with the QuantiFast RT Kits much shorter compared to QuantiTect RT Kits?
FAQ ID -1451
View
Why is the storage time for QuantiFast PCR Kits shorter than that for QuantiTect PCR Kits?
FAQ ID -1446
View
Why is the reaction volume for QuantiFast PCR Kits lower than that for QuantiTect PCR Kits?
FAQ ID -1447
View
Why is the QuantiFast denaturation step different for PCR and RT-PCR runs in the two-step protocol for the ABI 7500 and other cyclers?
FAQ ID -1442
View
What is the minimum number of siRNAs per order? If I order 40 siRNAs, can I get those on 2 plates?
FAQ ID -1468
View
Can purification columns from other suppliers be processed on the QIAcube?
FAQ ID -1406
View
Can QIAcube protocol runs be interrupted, and subsequently be continued to completion?
FAQ ID -1414
View
Can I use more than 4 µl FastLane lysate in subsequent real-time RT-PCR?
FAQ ID -1480
View
Are FlexiPlate siRNAs available at a higher final concentration than 10 µM?
FAQ ID -1476
View
Can different amounts of siRNA be ordered on one FlexiPlate?
FAQ ID -1473
View
Can 2 µl reaction volumes be used with QuantiFast PCR Kits?
FAQ ID -1440
View
Do the QuantiTect Primer Assays work with QuantiFast SYBR Green Kits?
FAQ ID -1439
View
Do special settings have to be used for QuantiFast PCR Kits on the Eppendorf Mastercycler ep realplex?
FAQ ID -1437
View
What information is required to reorder specific siRNAs from a siRNA Set in FlexiPlate format?
FAQ ID -1463
View
What are the turnaround times for FlexiPlate siRNA orders?
FAQ ID -1478
View
How much time will be saved when switching from standard cycling to fast cycling with QuantiFast Kits?
FAQ ID -1438
View
How many reactions can I perform with the new QuantiFast Kits for real-time PCR?
FAQ ID -1425
View
If FlexiPlate siRNA was accidentally redissolved in siRNA Suspension Buffer instead of water, resulting in a 2x buffer, would it affect performance of the siRNAs?
FAQ ID -1477
View
How do you achieve fast cycling, yet still deliver the same performance in PCR as that achieved with standard cycling?
FAQ ID -1430
View
Is it necessary to place the lids of the elution tube and column into the slots of the rotor adapter during processing on the QIAcube?
FAQ ID -1415
View
Why do QuantiFast SYBR Green PCR Kits require such a high primer concentration?
FAQ ID -1443
View
What QuantiFast Kit should be used on the Eppendorf Mastercycler ep realplex?
FAQ ID -1436
View
What is the detection limit of the QuantiFast Kits for real-time PCR?
FAQ ID -1432
View
Which kind of 96 and 384-well plates are available for FlexiPlate siRNAs?
FAQ ID -1459
View
Which cell lines have been tested with FastLane Cell RT-PCR Kits?
FAQ ID -1485
View
Can I adjust the ROX concentration in the QuantiFast master mix?
FAQ ID -1427
View
Can I follow the reaction setup for probe-based assays described in Appendix D of the FastLane Cell RT-PCR Handbook using 384-well plates?
FAQ ID -1482
View
Can FlexiPlate siRNAs be ordered in plates other than the standard NUNC 96 well V bottom plates?
FAQ ID -1458
View
Can fast cycling be carried out with QuantiFast Probe PCR Kits and FRET probes?
FAQ ID -1433
View
Can FlexiPlate siRNA be ordered in solution on dry-ice?
FAQ ID -1474
View
How do QuantiFast PCR Kits compare to QuantiTect PCR Kits for quantitative real-time PCR?
FAQ ID -1441
View
How can I get software updates for the QIAcube?
FAQ ID -1413
View
Do you offer trial-kit sizes for the new QuantiFast Kits?
FAQ ID -1429
View
Can the QIAcube rotor adapters be autoclaved?
FAQ ID -1409
View
Can QuantiFast PCR Kits be used on real-time PCR instruments without fast cycling options?
FAQ ID -1428
View
Does the high primer concentration required by QuantiFast SYBR Green PCR Kits impair annealing specificity?
FAQ ID -1444
View
Does the master mix in the QuantiFast Kits contain dUTP to allow UNG treatments?
FAQ ID -1431
View
Can the QuantiFast Probe PCR +ROX Vial mastermix be stored long-term after adding ROX dye?
FAQ ID -1435
View
What does the Investigator Nonaplex ESS Kit contain?
FAQ ID -2391
View
What are important points regarding the genomic DNA wipeout buffer in the QuantiFast Probe RT-PCR Plus Kit?
FAQ ID -2359
View
Why does the A peak reduction factor have to de set to 0.86 for the codon 61 assay in the therascreen NRAS Pyro Kit?
FAQ ID -2390
View
Will the sequence of the QuantiFast Probe Assays be provided?
FAQ ID -2369
View
Why are samples centrifuged at 4°C after addition of chloroform to the QIAzol lysates in following kits: RNeasy Lipid Tissue Mini/Midi kits, RNeasy Microarray Tissue Mini kit, RNeasy Plus Universal Mini/Midi kit, RNeasy 96 Universal Tissue kit, miRNeasy Mini kit, miRNeasy Micro kit, miRNeasy 96 kit and miRNeasy Serum/Plasma kit?
FAQ ID -2345
View
Why are there various different QuantiFast Probe Assays for my gene (previous versions, transcript variants)?
FAQ ID -2366
View
Why are the QuantiFast Probe Assays located on a single exon, thereby also detecting genomic DNA?
FAQ ID -2365
View
What plug-ins are available for the therascreen Pyro kits?
FAQ ID -2387
View
What real-time PCR cyclers can the therascreen EGFR PCR Kit be used with?
FAQ ID -2310
View
What real time cyclers can be used with the therascreen KRAS PCR kit?
FAQ ID -2305
View
What are the main differences between the qBiomarker PCR Arrays and the RT2 Profiler PCR Arrays?
FAQ ID -2438
View
What are the recommended storage conditions of the QuantiFast Probe RT-PCR Plus Kit components?
FAQ ID -2355
View
What are the differences between the existing QuantiFast Probe RT-PCR Kit and the new Plus Kit?
FAQ ID -2358
View
What is the concentration of the primers and the probe in a reaction using the QuantiFast Probe Assays?
FAQ ID -2370
View
What is the correct matrix to use with the Investigator Nonaplex ESS Kit?
FAQ ID -2395
View
What extraction procedure should I use for the therascreen EGFR RGQ PCR kit?
FAQ ID -2313
View
What instrument can I use for the therascreen EGFR RGQ PCR kit?
FAQ ID -2311
View
What is the average length of a QuantiFast Probe Assay?
FAQ ID -2374
View
Is the RNeasy Plus Universal Mini Kit suited for adipose, brain, and other fatty tissues?
FAQ ID -2343
View
Is the T790M mutation included in the therascreen EGFR PCR kit?
FAQ ID -2309
View
Is there a size limit to the protein I can crystallize with the NexTal Cubic Phase products?
FAQ ID -2331
View
Is the T790M mutation included in the EGFR PCR kit?
FAQ ID -2314
View
Show more results
Back to top
Contact QIAGEN
Global contacts
Technical Service
Customer Care
FAQListPage