常见问题
打印
Bookmark
分享
more..
您无权限查看此资源
分类选项
按字母顺序排序
按相关性排列
按字母顺序倒序排列
Why is maximum amplicon size for the Type-it Microsatellite PCR Kit limited to 500 bp?
FAQ ID -2060
浏览
Why is it recommended to add 1 mM IPTG for optimal protein yields using the EasyXpress Protein Synthesis Kits?
FAQ ID -860
浏览
Why is it not recommended to stabilize cells with RNAprotect Tissue Reagent?
FAQ ID -941
浏览
Why is EvaGreen instead of SYBR Green used as fluorescent dye in the Type-it HRM PCR Kit?
FAQ ID -2196
浏览
Why is DTT used only for semen samples?
FAQ ID -
143761
浏览
Why is CoralLoad included in the Type-it Mutation Detect, but not in the Type-it Microsatellite PCR Kit?
FAQ ID -2068
浏览
Why is carrier RNA used during the isolation of gDNA from microdissected samples with the QIAamp DNA Micro Kit?
FAQ ID -473
浏览
Why is an ice-incubation step included during reaction set-up when following the QuantiTect RT-PCR but not the QuantiTect PCR protocol.
FAQ ID -283
浏览
Why is a blood collection set required to collect blood into the PAXgene Blood ccfDNA Tube?
FAQ ID - 3628
浏览
Why is a blood collection set required to be used with the PAXgene Blood RNA tube?
FAQ ID - 3459
浏览
Why is a 2-step (and not a 3-step) cycling protocol recommended for Rotor-Gene SYBR Green Kits?
FAQ ID -2122
浏览
Why is a 2-step (and not a 3-step) cycling protocol recommended for QuantiFast SYBR Green PCR Kits?
FAQ ID -1450
浏览
Why is 18S ribosomal RNA (rRNA) used as a housekeeping gene to normalize sample-to-sample, systematic variation in qPCR assays?
FAQ ID -2675
浏览
Why have the hazard symbols accompanying products changed?
FAQ ID - 3430
浏览
Why had my RT² SYBR Green Mastermix been working well in the past, but now does not seem to be?
FAQ ID -2717
浏览
Why does the upper aqueous phase look pinkish when purifying RNA from fatty tissue?
FAQ ID -3118
浏览
Why does the template for EasyXpress Disulfide Insect Kits need to have a signal sequence (such as the mellitin signal sequence as provided by the EasyXpress Linear Template Fab Kit primers)?
FAQ ID -2967
浏览
Why does the SeqTarget Prep Protocol require a 2-step procedure?
FAQ ID -2238
浏览
Why does the QuantiTect Primer Assay for my gene of interest have only one version number?
FAQ ID -1134
浏览
Why does the QIAcube sometimes fail to pick up the tips or pick up wrong tips?
FAQ ID -3131
浏览
Why does the QIAamp DNA Mini Tissue Protocol require both ATL and AL buffer, while the Blood Protocol only uses AL?
FAQ ID -633
浏览
Why does the miScript Target Protector not induce the degradation process?
FAQ ID -2263
浏览
Why does the DNeasy mericon Food Kit use a QIAquick column and Buffer PB rather than a DNeasy column and Buffer AL, which might be expected since the kit isolates genomic DNA?
FAQ ID - 3347
浏览
Why does the DNeasy mericon Food extraction kit use a QIAquick column and not DNeasy column?
FAQ ID -3148
浏览
Why does the copy function not apply relative to migration time and normalized area values after loading the DNA size marker table and adding the alignment marker peaks on the QIAxcel System?
FAQ ID -1832
浏览
Why does the connection test fail?
FAQ ID - 141522
浏览
Why does the Allprep DNA/RNA 96 Kit use Buffer RLT, whereas the AllPrep DNA/RNA Mini Kit uses Buffer RLT Plus?
FAQ ID -1999
浏览
Why does TA/UA cloning work with your proofreading HotStar HiFidelity DNA Polymerase?
FAQ ID -1053
浏览
Why does my realtime PCR assay quality decrease over time?
FAQ ID -589
浏览
Why does my purified DNA/RNA sometimes have a 260/280 or 260/230 ratio of more than 2? Does that mean the purity is poor?
FAQ ID -3132
浏览
Why does my PCR product show up later when comparing the QuantiTect SYBR Green PCR Kits with Roche kits using the same annealing temperature?
FAQ ID -1083
浏览
Why does my isolated RNA have a low OD 260/280 ratio?
FAQ ID -97
浏览
Why does my DNA sample float out of the slot when loading it onto an agarose gel?
FAQ ID -205
浏览
Why does AllPrep DNA/RNA/Protein Mini kit use buffer RLT, but Allprep DNA/RNA Mini and Allprep DNA/RNA Micro kits use buffer RLT Plus? Are these buffers interchangeable?
FAQ ID - 3391
浏览
Why do you recommend using Triton X for the purification of 6xHis-tagged protein?
-100
浏览
Why do the Internal Control templates for extraction (Internal Control DNA or RNA [High conc.]) have a 10x higher concentration than the IC templates provided with the QuantiFast Pathogen PCR +IC Kit and the QuantiFast Pathogen RT-PCR +IC Kit?
FAQ ID -2603
浏览
Why do replicates in real-time PCR have different plateau heights?
FAQ ID -539
浏览
Why do QuantiFast SYBR Green PCR Kits require such a high primer concentration?
FAQ ID -1443
浏览
Why do qBiomarker Copy Number PCR Arrays have assays in quadruplicate?
FAQ ID — 3414
浏览
Why do pQE-T7 vectors of the QIAgenes E. coli system have an additional UAG amber stop codon?
FAQ ID -2043
浏览
Why do my qPCR amplification curves or plots decrease in fluorescence intensity after the saturation phase?
FAQ ID -2689
浏览
Why do melting temperatures differ between PCR fragments amplified with QIAGEN's QuantiTect SYBR Green PCR Kits and Roche Kits?
FAQ ID -1084
浏览
Why do I sometimes get light blue colonies when using the QIAGEN PCR Cloning Kit?
FAQ ID -603
浏览
Why do I see multiple high-intensity peaks in my qPCR dissociation curve at temperatures less than 70 ºC?
FAQ ID -2690
浏览
Why do I see low, poor, or sub-standard amplification efficiency in my qRT-PCR assay?
FAQ ID -2695
浏览
Why do I observe a CT shift for the Internal Control in some samples in comparison to the CT value for the Internal Control of the dilution series of the Male Control DNA M1?
FAQ ID - 3745
浏览
Why do I need to identify my real-time instrument model when placing my order for RT² qPCR Primer Assays?
FAQ ID -2713
浏览
Why do I need normalization using Rotor-Gene ScreenClust HRM Software?
FAQ ID -2198
浏览
Why do I have wavy DNA bands on my agarose gel?
FAQ ID -2260
浏览
Why do I have to use an ACS (Assay Control Set)?
FAQ ID -2933
浏览
Why do I have to add beta-mercaptoethanol (beta-ME) to lysis Buffer RLT of the RNeasy Kits?
FAQ ID -101
浏览
Why do I get smeared PCR products?
FAQ ID -87
浏览
Why do I get genomic DNA contamination in my plasmid prep?
FAQ ID -353
浏览
Why do I get amplification in a negative control DNA tube using the REPLI-g Kit for WGA?
FAQ ID -675
浏览
Why do casework-sample protocols for the QIAsymphony DNA Investigator Kit start with different lysate volumes (200 µl, 500 µl, or 1000 µl)?
FAQ ID -2035
浏览
Why did you choose ORF1a+ORF1b and ORF3a+ORF7a?
FAQ ID - 3893
浏览
Why did you choose MAPK1 as a positive control in the QIAGEN RNAi Human/Mouse Control Kit?
FAQ ID -604
浏览
Why did we not choose commonly used genes such as the S gene, E gene, or RdRP?
FAQ ID - 3892
浏览
Why did the real-time PCR yield Ct values < 12?
FAQ ID -2727
浏览
Why can’t I see my QIAcube Connect instrument in the QIAcube Connect App?
FAQ ID - 1414518
浏览
Why can't I find the DNA methylation qPCR Assay for my gene of interest?
FAQ ID -2743
浏览
Why can I not find the QuantiTect Primer Assay in GeneGlobe that I had previously ordered from QIAGEN?
FAQ ID -1138
浏览
Why can I not find the Q-Base device in the device list during the first installation?
FAQ ID - 141516
浏览
Why are two reagents used in the PAXgene Tissue System?
FAQ ID -3022
浏览
Why are two reagents used in the PAXgene Tissue System?
FAQ ID - 3603
浏览
Why are there various different QuantiTect Primer Assays for my gene (previous versions, transcript variants)?
FAQ ID -1133
浏览
Why are there various different QuantiFast Probe Assays for my gene (previous versions, transcript variants)?
FAQ ID -2366
浏览
Why are the RT² qPCR Primer Assays not designed to cross exon-intron junctions or boundaries?
FAQ ID -2710
浏览
Why are the QuantiTect and QuantiFast Multiplex PCR Kits limited to triplex real-time PCR on some cyclers?
FAQ ID -715
浏览
Why are the QuantiFast Probe Assays located on a single exon, thereby also detecting genomic DNA?
FAQ ID -2365
浏览
Why are the denaturation and annealing/extension times for QuantiFast Multiplex RT-PCR Kits much shorter than those for QuantiFast Multiplex PCR Kits?
FAQ ID -2147
浏览
Why are the centrifugation speeds for the QIAamp DNA Mini kit at 6000 x g? Can I spin at full speed?
FAQ ID -474
浏览
Why are some of my samples outside of the cluster using Rotor-Gene ScreenClust HRM Software?
FAQ ID -2204
浏览
Why are some of my RNAprotect-stabilized samples frozen at 0ºC while others are not?
FAQ ID -758
浏览
Why are samples centrifuged at 4°C after the addition of chloroform when using RNeasy Lipid Tissue Kits?
FAQ ID -533
浏览
Why are samples centrifuged at 4°C after addition of chloroform to the QIAzol lysates in following kits: RNeasy Lipid Tissue Mini/Midi kits, RNeasy Microarray Tissue Mini kit, RNeasy Plus Universal Mini/Midi kit, RNeasy 96 Universal Tissue kit, miRNeasy Mini kit, miRNeasy Micro kit, miRNeasy 96 kit and miRNeasy Serum/Plasma kit?
FAQ ID -2345
浏览
Why are not all applications/kits/protocol files visible in the run setup (QIAcube Connect App)?
FAQ ID - 1414520
浏览
Why are my realtime PCR amplification plots hook-shaped?
FAQ ID -587
浏览
Why are my qPCR Ct values too low (< 12) in my qRT-PCR Assay?
FAQ ID -2684
浏览
Why are my qPCR Ct values too high (> 35 or not detectable) in my qRT-PCR assay?
FAQ ID -2685
浏览
Why are my DV200 values of my RNA sample so low?
FAQ ID - 3957
浏览
Why are most of my samples outside of the cluster in supervised mode using Rotor-Gene ScreenClust HRM Software?
FAQ ID -2205
浏览
Who can help in case of issues with the third party instrument?
3799
浏览
Who can help if it is not clear if issues are caused by the third party instrument or by the chemistry?
3802
浏览
Which version of the EZ2 Connect can run the EZ2 RNA/miRNA Tissue/Cells Kit?
FAQ ID - 3851
浏览
Which version of the EZ2 Connect can run the EZ2 RNA FFPE Kit?
FAQ ID - 3940
浏览
Which version of the EZ2 Connect can run the EZ2 AllPrep DNA/RNA FFPE Kit?
FAQ ID - 3947
浏览
Which variants of the EasyXtal 15-well tool are available?
FAQ ID -2221
浏览
Which types and amounts of sample material can be processed for RNA extraction on the QIAsymphony SP?
FAQ ID -1937
浏览
Which tubes are recommended for the QIAsymphony sample rack
FAQ ID - 3653
浏览
Which transfection reagent is recommended for transfection of the miScript Target Protectors?
FAQ ID -2252
浏览
Which software updates are included in a Premium Cover Agreement for my QIAGEN Instrument?
FAQ ID -1336
浏览
Which SARS-CoV-2 targets can the SARS-CoV-2 Neo Kit detect?
FAQ ID - 3881
浏览
Which sample types can be processed using the QIAsymphony Virus Blood 200 protocol?
FAQ ID -2154
浏览
Which sample types can be processed using the QIAsymphony PAXgene Blood RNA Protocol?
FAQ ID -2981
浏览
Which sample types can be processed using the PAXgene Blood miRNA protocols?
FAQ ID - 3478
浏览
Which sample preparation method is recommended for QIAcuity dPCR?
3779
浏览
Which sample materials are CE-IVD validated for the RealStar Filovirus Screen?
FAQ ID - 3529
浏览
Which Rotor-Gene Q rotor should be used with the EGFR RGQ PCR kit?
FAQ ID -2315
浏览
Which resin is used in the QIAexpress Ni-NTA Fast Start Columns?
FAQ ID -836
浏览
Which regions are covered by the GR DNAseq V2 Panels (#181900)?
FAQ ID - 3688
浏览
Which real-time PCR kits are recommended downstream of the QuantiTect Whole Transcriptome Kit?
FAQ ID -1592
浏览
Which QuantiTect Primer Assay should I choose for my gene of interest?
FAQ ID -1135
浏览
Which Qproteome or Protein Fractionation Kits from QIAGEN are compatible with tissue samples?
FAQ ID -755
浏览
Which qPCR instrument should I use with your RT² qPCR Primer Assays?
FAQ ID -2714
浏览
Which QIAsymphony Virus/Bacteria Kit size should be used for each protocol?
FAQ ID -2038
浏览
Which QIAGEN plasmid preparation kits will contain LyseBlue Reagent?
FAQ ID -865
浏览
Which QIAGEN kit do you recommend for purifying plasmid DNA suitable for transfection of sensitive cells?
FAQ ID -1092
浏览
Which QIAGEN DNA extraction kits are compatible with the PAXgene Saliva Collector?
3821
浏览
Which QIAcube Connect standard protocol might be suitable to extract RNA from saliva or from a buccal cell pellet?
FAQ ID - 141508
浏览
Which PyroMark Gold Q96 Reagent should be used for which instrument and application?
FAQ ID -2836
浏览
Which purity grade is recommended for pyrosequencing primers?
FAQ ID -2832
浏览
Which purification kits are recommended for the Pyro kits?
FAQ ID -2380
浏览
Which protocol line should I use to process plasma samples?
FAQ ID - 3654
浏览
Which probe labels are available for the QuantiFast Probe Assays?
FAQ ID -2361
浏览
Which probe labels are available for the Microbial DNA qPCR Assays?
FAQ ID — 3407
浏览
Which primers can I use for sequencing pQE-expression vector constructs?
FAQ ID -343
浏览
Which positive control should I use?
FAQ ID - 3896
浏览
Which plate formats are offered for QuantiTect Primer Assay Plates?
FAQ ID -2106
浏览
Which plasma volumes can I process with the QIAsymphony PAXgene Blood ccfDNA protocols?
FAQ ID - 3648
浏览
Which parts are exchanged during a Preventive Maintenance visit for my QIAGEN BioRobot?
FAQ ID -1334
浏览
Which operating system is compatible with PyroMark Q24 Advanced application software?
FAQ ID -3164
浏览
Which operating system is compatible with PyroMark IdentiFire Software?
FAQ ID - 3340
浏览
Which nucleotide analogs can be used with TopTaq DNA Polymerase?
FAQ ID -1741
浏览
Which network settings are supported by the QIAcube Connect and Q-Base?
FAQ ID - 141517
浏览
Which mode should I use in the Rotor-Gene ScreenClust HRM Software, supervised or unsupervised?
FAQ ID -2202
浏览
Which Microbial qPCR Mastermix should I use?
FAQ ID — 3395
浏览
Which kits can be used in combination with the PyroMark CpG Assays and PyroMark Custom Assays?
FAQ ID -2822
浏览
Which kits and protocols can be used to isolate nucleic acids from microdissected PAXgene Tissue fixed, paraffin-embedded (PFPE) and PAXgene Tissue fixed, cryo-embedded (PFCE) specimens?
FAQ ID - 3617
浏览
Which kit, the QIAprep 96 Plus Miniprep Kit or the QIAGEN Plasmid Plus 96 Miniprep Kit, do you recommend for transfection?
FAQ ID -2320
浏览
下一页
回到顶部
联系QIAGEN
全球各分公司联系方式
技术支持
客户服务
FAQListPage