FAQ ID -3000

FAQ ID -562

Focus on Your Pathway

Dr. Davide Manessero
QIAGEN

Carsten Hohoff, Institute of Forensic Genetics GmbH, Münster

A high-performance computing solution for mapping reads to a reference and de novo assembly of next-generation sequencing data.

QuantiTect Multiplex PCR Kit - with master mix containing ROX passive reference dye QuantiTect Multiplex PCR NoROX Kit - with master mix free of ROX passive reference dye For quantitative, multiplex, real-time PCR and two-step RT-PCR using sequence-specific probes  

For more information about this product, please refer to JAK2 RGQ PCR Kit Handbook (www.qiagen.com/JAK2).

QIAcube HT instrument operating software. This software offers a state-of-the-art user interface and a wizard-guided experimental setup for quick and easy purification experiments.

For software installation instructions, please refer to the QIAcube HT Unpacking and Installation Instructions or to the QIAcube HT User Manual, chapter 4.4.1.

Important: It is not possible to install both QIAcube HT Prep Manager Software and QIAcube HT Operating Software 4.17 on the same computer. Please uninstall QIAcube HT Operating Software 4.17 before installing QIAcube HT Prep Manager Software. For more information, contact QIAGEN Technical Services.

Global effort that coordinates assembly of a standardized reference sequence library for all fish species

QIAcube HT instrument operating software. This software offers a state-of-the-art user interface and a wizard-guided experimental setup for quick and easy purification experiments.

For software installation instructions, please refer to the QIAcube HT Unpacking and Installation Instructions or to the QIAcube HT User Manual, chapter 4.4.1.

Important: It is not possible to install both QIAcube HT Prep Manager Software and QIAcube HT Operating Software 4.17 on the same computer. Please uninstall QIAcube HT Operating Software 4.17 before installing QIAcube HT Prep Manager Software. For more information, contact QIAGEN Technical Services.

Here we present data to demonstrate use of the GeneRead QIAact Actionable Insights Tumor Panel and workflow with reference standard and biological liquid biopsy samples 

Please refer to the PyroMark KRAS v2.0 Handbook

Please refer to the PyroMark KRAS v2.0 Handbook

Please refer to the PyroMark KRAS v2.0 Handbook

QuantiTect Multiplex RT-PCR Kit - with master mix containing ROX passive reference dye QuantiTect Multiplex RT-PCR NR Kit - with master mix free of ROX passive reference dye For gene expression analysis by quantitative, multiplex, real-time one-step RT-PCR using sequence-specific probes

For further information on which version of the v11 template files is suitable for your needs, please refer to the Template File Info Note.

For further information on which version of the v11 template files is suitable for your needs, please refer to the Template File Info Note.

Release of QIAxpert Instrument Software v2.4.3.101. This release includes the latest versions of the following Apps: DNA QIAamp, DNA QIAsymphony, DNA Mammalian, DNA Plant, PCR QIAquick, Purified PCR, RNA RNeasy, RNA, PAXgene RNA, RNA FFPE, A₂₆₀ dsDNA, A₂₆₀ RNA, A₂₆₀ ssDNA, A₂₈₀ Protein, UV/Vis and OD check.

For more information on the installation process, please refer to Section 5.11.1 (Installing New Protocols), of the QIAcube Connect MDx User Manual.

For details on the software changes, please refer to the Software Release Note and "Important Note: QIAcube Connect Software Version 1.3 Update" on this page.

For more information on the installation of language files and translated protocol files, please refer to sections 4.5.1. (System Configurations, Step 7) and 5.11.1 (Installing new protocols) of the QIAcube Connect MDx User Manual. The protocol files have not changed, but after software update to version 1.0.1. IVD, protocol and language files have to be re-loaded.

For more information on the installation of language files and translated protocol files, please refer to sections 4.5.1. (System Configurations, Step 7) and 5.11.1 (Installing new protocols) of the QIAcube Connect MDx User Manual. The protocol files have not changed, but after software update to version 1.0.1. IVD, protocol and language files have to be re-loaded.

Instrument operating software including the QIAgility Setup Manager Gene Expression, Pathogen Detection, Sample Pooling and Generic PCR plug-in. The software offers a complete solution for qPCR setup, sample normalization, CE loading, certain liquid handling, as well as sample pooling. The Gene Expression and Pathogen Detection plug-ins are optimized for use with QIAGEN gene expression and pathogen detection kits, such as QuantiTect, QuantiFast, QuantiNova and Rotor-Gene kits. The Generic PCR plug-in allows flexible qPCR setup, liquid handling and support for the whole HID workflow.

For software installation instructions, please refer to the QIAgility Unpacking and Installation Instructions or to the QIAgility User Manual, chapter 4.4.

Important: It is not possible to install both QIAgility Setup Manager Software and QIAgility Operating Software 4.18 on the same computer. Please uninstall QIAgility Operating Software 4.18 before installing QIAgility Setup Manager Software. For more information, contact QIAGEN Technical Services.

Version 1.1.2

This is the language package corresponding to the EZ2 Connect software. For more information on the installation process, please refer to Section 5.3.7 (Language Settings) of the EZ2 Connect and EZ2 Connect Fx User Manual.

Version 1.1.2

This is the language package corresponding to the EZ2 Connect software. For more information on the installation process, please refer to Section 5.3.7 (Language Settings) of the EZ2 Connect and EZ2 Connect Fx User Manual.

Version 1.1.2

For more information on the installation process, please refer to Section 5.3.8 (Updating software), of the EZ2 Connect MDx User Manual. This software release contains the same protocols as version 1.1.1. For details on the contained protocol package and the software changes refer to the customer information letter on this page.

Version 8 (old version, compatible with software version 1.1)

For more information on the installation process, please refer to Section 5.3.6. (Installing New Protocols), of the EZ2 Connect and EZ2 Connect Fx User Manual.

Version 8 (old version, compatible with software version 1.1)

For more information on the installation process, please refer to Section 5.3.6. (Installing New Protocols), of the EZ2 Connect MDx User Manual.

This package contains protocols in version 5 for the EZ1 DSP Virus Kit and in version 7 for the EZ1 DSP DNA Blood Kit. Since launch of the EZ2 Connect MDx instrument, there was no change in the DSP protocols for diagnostic use.

For details on the changes, refer to "Release Note: EZ2 Connect MDx Protocol Package".

Version 1.2.0

For more information on the installation process, please refer to Section 5.3.8 (Updating software) of the EZ2 Connect and EZ2 Connect Fx User Manual.

Version 1.2.0

For more information on the installation process, please refer to Section 5.3.8 (Updating software) of the EZ2 Connect MDx User Manual.

For details on the software changes, please refer to Important Note: Known Bugs ScreenGel V2.1 and Important Note: Use of Thermo Scientific Marker GeneRuler 1 kb DNA-Ladder with QIAxcel ScreenGel.

Version 8 (old version, compatible with software version 1.1)

Note: Unzip the folder prior to installation on the EZ2 Connect instrument, and install the *.ez2u file only.

For more information on the installation process, please refer to Section 5.3.6. (Installing New Protocols), of the EZ2 Connect and EZ2 Connect Fx User Manual.

Version 10 

Note: Unzip the folder prior to installation on the EZ2 Connect instrument, and install the *.ez2u file only.

For more information on the installation process, please refer to Section 5.3.6 (Installing New Protocols) of the EZ2 Connect and EZ2 Connect Fx User Manual.

Version 10 

Note: Unzip the folder prior to installation on the EZ2 Connect MDx instrument, and install the *.ez2u file only.

For more information on the installation process, please refer to Section 5.3.6. (Installing New Protocols), of the EZ2 Connect MDx User Manual.

This package contains protocols in version 5 for the EZ1 DSP Virus Kit and in version 7 for the EZ1 DSP DNA Blood Kit. Since launch of the EZ2 Connect MDx instrument, there was no change in the DSP protocols for diagnostic use.

For details on the changes, refer to "Release Note: EZ2 Connect MDx Protocol Package".

For more information on the software changes and the installation process, please refer to the customer information letter which can be found on the QIAcube Connect MDx product page under the "Technical Information and Important Notes" tab of section "Resources".

The QIAcuity backup and restore scripts are a standalone solution to backup all relevant user data of the QIAGEN Software Suite for disaster recovery and to restore the data on a new or existing QIAGEN Software Suite installation. The backup supports the QIAcuity Software Suite version 2.5 and can be conducted manually or automatically by using of the Windows Task Scheduler.

Note: Windows Admin permission is needed to setup and perform an automated backup and for manual backup and restore.

For backup and restore of Software versions lower than 2.5, please refer to the QIAcuity Software Suite Backup and Restore Scripts for version 2.0, 2.1.7, 2.1.8, and 2.2. 

Note: Windows Admin permission is needed to setup and perform an automated backup and for manual backup and restore.

Please read the QIAcuity Software Suite Backup and Restore Scripts document for more information and instructions how to use the scripts.

 

For more information on the software changes and the installation process, please refer to the Software Release Note on this page.

Predesigned assays for quantification of CpG methylation by Pyrosequencing

For multiplex amplification of FGA (FIBRA), SE33 (ACTBP2), and Amelogenin

Predesigned assays for quantification of CpG methylation by Pyrosequencing

For detection of human papillomavirus infections

FAQ ID -2414

For high-throughput, automated PCR applications

For use as an aid in the detection of Mycobacterium tuberculosis (TB) infection

Download Safety Data Sheets for QIAGEN product components.

For use with all QIAGEN spin products

High-throughput assay setup for human identity samples

High-throughput assay setup for human identity samples

For detection of multiple hallmark mutations in cancer-relevant genes using the QIAcuity digital PCR instruments

For locus-specific analysis of copy number variations and alterations by singleplex or multiplex dPCR

BioRobot M48과 MagAttract DNA Mini M48 Kit을 이용하여 forensic과 biosecurity application을 하기 위한 protocol을 쉽게 setup할 수 있습니다

For sensitive probe-based detection of residual CHO host cell DNA, including an internal control

For simple, reliable and standardized sample collection

For custom profiling of copy number variations and alterations

For RNA library construction from single cells for Illumina sequencing applications

For high-throughput punching and assay setup for human identity samples

For long noncoding gene expression analysis by real-time PCR

For NGS data interpretation and reporting

Sequence-specific probes를 이용한 quantitative, multiplex, real-time one-step RT-PCR을 통하여 유전자 발현 분석을 할 수 있습니다

 Two-step RT-PCR과 multiplex real-time PCR을 신속히 수행할 수 있습니다

 Sequence-specific probe를 이용한 quantitative, multiplex, real-time PCR과 two-step RT-PCR를 수행할 수 있는 master mix입니다

For ultrafast, multiplex, real-time PCR and two-step qRT-PCR using sequence-specific probes

For fast, reliable quantification of up to 5 RNA targets in a single tube by multiplex real-time RT-PCR

For in-depth, accurate and reliable gene expression analysis using LNA-enhanced SYBR® Green qPCR

For high-resolution mapping of chromatin folding, high-quality assembly of genome sequences, haplotype phasing and identifying chromosomal rearrangements

Whole blood와 bone marrow에서 archive-quality의 DNA를 분리 정제할 수 있습니다

The gold standard resource for comprehensive data on published human inherited disease mutations.

For qualitative or semi-quantitative detection of the JAK2 V617F/G1849T mutation using real-time PCR

 Human, mouse, rat의 miRNA를 real-time PCR로 정량 후 정량값을 표준화 할 수 있습니다

 Bone marrow 샘플을 안정화하여 보관과 이동을 할 수 있고 intracellular RNA를 분리 정제할 수 있습니다

 Bone marrow 샘플을 안정화하여 보관과 이동을 할 수 있고 intracellular RNA를 분리 정제할 수 있습니다