QIAamp Virus BioRobot MDx Kit

BioRobot MDx workstation을 이용하여 cell-free body fluids에서 viral nucleic acids를 자동으로 분리 정제할 수 있습니다

Products

QIAamp Virus BioRobot MDx Kit은/는 분자생물학 분야에 사용하기 위한 것입니다. 이 제품은 질병의 진단, 예방, 또는 치료용이 아닙니다.
Image

QIAamp Virus BioRobot MDx Kit (12)

Cat. No. / ID:   965652

For 12 x 96 preps for use on the BioRobot MDx; includes: 12 QIAamp 96 Plates, RNase-free buffers, QIAGEN Protease, Elution Microtubes CL, caps, S-Blocks, carrier RNA
€10,032.00

특징

  • High-quality의 신속한 분리 정제, ready-to use viral DNA and RNA
  • Organic extraction 또는 alcohol precipitation 불필요
  • 효율이 높고 결과가 일정함
  • 정확한 downstream applications을 위해 inhibitor와 contaminant를 완벽히 제거함

제품 세부 정보

The QIAamp Virus BioRobot MDx Kit provides automated viral nucleic acid purification on the BioRobot MDx using proven QIAamp technology. The fully automated procedure requires less than 2.5 hours, including bar code reading and complete process documentation, with no hands-on time during the run.

성능

The QIAamp Virus BioRobot MDx process provides uniform DNA and RNA recovery and purity across the 96-well plate with no detectable cross-contamination between samples. Up to 265 µl of cell-free body fluids can be processed. The typical elution volume is 75 µl. Viruses can be detected with high sensitivity when using this kit, which is illustrated by hit-rate studies (see table). Further advantages of the system include high process reliability and walkaway automation, providing a highly efficient system for purification of viral nucleic acids. The QIAamp Virus BioRobot MDx provides reliable results in downstream applications.

High precision using the QIAamp Virus BioRobot MDx Kit
PCR product (n=96)Instrument 1Instrument 2
Mean CTStandard deviation%CVMean CTStandard deviation%CV
Mimic virus28.260.100.3528.380.180.65
Internal control31.980.160.5131.870.220.70
Plasma was spiked with armored RNA molecules to mimic RNA viruses (25,000 copies per prep) and processed using the QIAamp Virus BioRobot MDx protocol in replicates of 96 on two separate instruments. An internal control RNA was added to the lysis buffer. The eluted RNA was amplified using a TaqMan RT-PCR system. Mean CT value, standard deviation, and %CV were calculated for both the mimic virus and the internal control. (Data generated by QIAGEN R&D department.)

원리

The QIAamp Virus BioRobot MDx Kit simplifies isolation of viral RNA and DNA from cell-free body fluids with a fast automated 96-well–plate procedure. No phenol–chloroform extraction is required. Nucleic acids bind specifically to the QIAamp silica-gel membrane while contaminants pass through. PCR inhibitors, such as divalent cations and proteins, are completely removed in two efficient wash steps, leaving pure nucleic acids to be eluted in either water or a buffer provided with the kit. QIAamp technology yields viral RNA and DNA from cell-free body fluids ready to use in PCR and blotting procedures.

The fully automated procedure, including bar code reading and complete process documentation, requires less than 2.5 hours to process 96 samples (including a detailed load check of 20 minutes) with no hands-on time during the run. Advantages of the system include high process reliability and walkaway automation, providing a highly efficient system for purification of viral nucleic acids for laboratories. QIAamp sample preparation technology is fully licensed.

절차

Optimized buffers lyse samples, stabilize nucleic acids, and enhance selective nucleic acid adsorption to the QIAamp membrane. Alcohol is added and lysates loaded onto the QIAamp 96-well plate. Wash buffers are used to remove impurities and pure, ready-to-use nucleic acids are then eluted in water or low-salt buffer (see flowchart " Protocol").
그림 참조

응용 분야

The QIAamp Virus BioRobot MDx Kit provides automated, high-throughput purification of viral RNA and DNA on the BioRobot MDx using proven QIAamp technology. The 96-well plates provide the flexibility of processing 32–96 samples, in increments of 8. Sample sources include:

  • Plasma and serum
  • CSF
  • Other cell-free body fluids
  • Cell-culture supernatants

지원되는 데이터 및 수치

Specifications

FeaturesSpecifications
ApplicationsPCR, qPCR, real-time PCR
Samples per run (throughput)36-92 samples per run
TechnologySilica technology
Main sample typeSerum, plasma
Elution volume75 µl
ProcessingAutomated
For automated processingBioRobot MDx Workstation
Sample amount265 µl
Format96-well plates
Purification of total RNA, miRNA, poly A+ mRNA, DNA or proteinViral DNA, viral RNA
Time per run or per prep<2.5 hours
Yield>90% recovery

리소스

Brochures & Guides (2)
Safety Data Sheets (1)
Kit Handbooks (1)
For simultaneous purification of viral RNA and DNA from plasma, serum, cell-culture supernatants, and cell–free body fluids using the BioRobot MDx
Certificates of Analysis (1)

FAQ

What is the difference between QIAGEN Protease and QIAGEN Proteinase K provided in various QIAamp Kits?

QIAGEN Proteinase K is a subtilisin-type protease, which cleaves at the carboxyl side of hydrophobic, aliphatic and aromatic amino acids. It is particularly suitable for short digestion times. It possesses a high specific activity over a wide range of temperatures and pH values with substantially increased activity at higher temperature. Soluble calcium is not essential for enzymatic activity. This means that EDTA, which is used to inhibit Mg2+-dependent enzymes such as nucleases, will not inhibit Proteinase K activity.

QIAGEN Protease is a broad-specificity Serine protease with high activity, cleaving preferentially at neutral and acidic residues. It is an economical alternative to Proteinase K for isolation of native DNA and RNA from a variety of samples.

FAQ ID -761
What can be used as an alternative to the A260 measurement for quantification of small amounts of RNA and DNA?

Small amounts of RNA and DNA may be difficult to measure spectrophotometrically. Fluorometric measurements, or quantitative RT-PCR and PCR are more sensitive and accurate methods to quantify low amounts of RNA or DNA.

Fluorometric measurements are carried out using nucleic acid binding dyes, such as RiboGreen® RNA Quantitation Reagent for RNA, and PicoGreen® DNA Quantitation Reagent for DNA (Molecular Probes, Inc.).

FAQ ID -728
How do I safely inactivate biohazardous flow-through material?

Always dispose of potentially biohazardous solutions according to your institution’s waste-disposal guidelines. Although the lysis and binding buffers in QIAamp, DNeasy, and RNeasy kits contain chaotropic agents that can inactivate some biohazardous material, local regulations dictate the proper way to dispose of biohazards. DO NOT add bleach or acidic solutions directly to the sample-preparation waste. Guanidine hydrochloride in the sample-preparation waste can form highly reactive compounds when combined with bleach.
Please access our Material Safety Data Sheets (MSDS) online for detailed information on the reagents for each respective kit.

FAQ ID -12