FAQ
印刷
Bookmark
シェア
more..
You are not authorized to download the resource
Sort options
アルファベット順
関連順
Will acetone precipitation recommended in the Qproteome Protocols denature Protein?
FAQ ID -807
表示
Why would clumps occur following the addition of Buffer P2 when using LyseBlue Reagent in a plasmid preparation?
FAQ ID -862
表示
Why should I work with diluted or undiluted screens?
FAQ ID -2419
表示
Why should I use the RNeasy Microarray Tissue Mini Kit when purifying RNA for microarray analysis?
FAQ ID -2188
表示
Why should I use the EpiTect Plus FFPE Bisulfite Kit instead of isolating FFPE DNA first and then doing the bisulfite conversion?
FAQ ID -2412
表示
Why should I use RT² SYBR Green Mastermix with RT² qPCR Primer Assays?
FAQ ID -2706
表示
Why should DNA or cDNA targets be less than 250 bp long for real-time PCR?
FAQ ID-751
表示
Why might my gene of interest drop out during WGA if it is not near a telomere or centromere?
FAQ ID -703
表示
Why might Affymetrix GeneChip Mapping assays interfere with the REPLI-g FFPE kit?
FAQ ID -1755
表示
Why is VeraSeq 2.0 DNA Polymerase sometimes cloudy upon removing from -20°C storage?
FAQ ID - 3913
表示
Why is there RNA in the DNA eluate when using the AllPrep DNA Mini Spin Column?
FAQ ID -1044
表示
Why is there no vacuum-only protocol for the RNeasy Plus 96 Kit?
FAQ ID -1993
表示
Why is there no QuantiTect Primer Assay for my gene of interest?
FAQ ID -1140
表示
Why is there no male DNA obtained from sexual assault samples?
FAQ ID -
143767
表示
Why is there no detection of free reporter fluorescence in the LiquiChip System?
FAQ ID -732
表示
Why is there more than one QIAgene for my gene of interest?
FAQ ID -2044
表示
Why is there DNA in the no-template control reaction when using the standard REPLI-g procedure, but not when using the UltraFast procedure?
FAQ ID -1327
表示
Why is there DNA in the no-template (negative) control when using the QuantiTect Whole Transcriptome Kit?
FAQ ID -1620
表示
Why is there an asterisk for my miScript Primer Assays?
FAQ ID -2176
表示
Why is there a need to overlay the resuspended DNA pellet with PRS again (step 17 of QSP)?
FAQ ID - 3951
表示
Why is the Type-it Mutation Detect PCR Kit recommended for preamplification of SNPs?
FAQ ID -2067
表示
Why is the storage time for QuantiFast PCR Kits shorter than that for QuantiTect PCR Kits?
FAQ ID -1446
表示
Why is the RT step with the QuantiFast RT Kits much shorter compared to QuantiTect RT Kits?
FAQ ID -1451
表示
Why is the reaction volume for QuantiFast PCR Kits lower than that for QuantiTect PCR Kits?
FAQ ID -1447
表示
Why is the QuantiFast denaturation step different for PCR and RT-PCR runs in the two-step protocol for the ABI 7500 and other cyclers?
FAQ ID -1442
表示
Why is the qRT-PCR reproducibility so critical when detecting gene expression knock down in an RNAi experiment?
FAQ ID -2774
表示
Why is the QIAcube Connect App reacting so slowly?
FAQ ID - 141519
表示
Why is the QIAamp Viral RNA Mini Kit (50) currently unavailable?
FAQ ID -147395
表示
Why is the pQE DNA provided in QIAexpress Kits blue in color?
FAQ ID -487
表示
Why is the Phoenix Hot Start Taq sometimes cloudy upon removing from -20°C storage?
FAQ ID - 3906
表示
Why is the initial activation step different for Rotor-Gene Probe, SYBR Green and Multiplex Kits?
FAQ ID -2118
表示
Why is the fluorescence signal of the Internal Control on my Rotor-Gene Q very low?
FAQ ID -2574
表示
Why is the final heat denaturation step so important with the QIAsymphony PAXgene Blood RNA protocol?
FAQ ID -2987
表示
Why is the copy number call lower than expected?
FAQ ID — 3413
表示
Why is the activation time for HotStarTaq Plus Polymerase in the QuantiFast SYBR Green Kits different from that for QuantiFast Probe Kits?
FAQ ID -1449
表示
Why is special Type-it Fast SNP Probe PCR chemistry required for TaqMan® SNP Genotyping?
FAQ ID -2057
表示
Why is my plasmid DNA yield low?
FAQ ID -768
表示
Why is my no template control (NTC) real-time Ct value < 35 cycles in my qPCR Assay?
FAQ ID -2686
表示
Why is my EpiTect Methyl qPCR Assay "failed" as indicated in the QC page of the data analysis Excel file?
FAQ ID -2734
表示
Why is my 260/280 ratio low after using the DNeasy mericon Food Kit?
FAQ ID - 3349
表示
Why is maximum amplicon size for the Type-it Microsatellite PCR Kit limited to 500 bp?
FAQ ID -2060
表示
Why is it recommended to add 1 mM IPTG for optimal protein yields using the EasyXpress Protein Synthesis Kits?
FAQ ID -860
表示
Why is it not recommended to stabilize cells with RNAprotect Tissue Reagent?
FAQ ID -941
表示
Why is EvaGreen instead of SYBR Green used as fluorescent dye in the Type-it HRM PCR Kit?
FAQ ID -2196
表示
Why is DTT used only for semen samples?
FAQ ID -
143761
表示
Why is CoralLoad included in the Type-it Mutation Detect, but not in the Type-it Microsatellite PCR Kit?
FAQ ID -2068
表示
Why is carrier RNA used during the isolation of gDNA from microdissected samples with the QIAamp DNA Micro Kit?
FAQ ID -473
表示
Why is an ice-incubation step included during reaction set-up when following the QuantiTect RT-PCR but not the QuantiTect PCR protocol.
FAQ ID -283
表示
Why is a blood collection set required to collect blood into the PAXgene Blood ccfDNA Tube?
FAQ ID - 3628
表示
Why is a blood collection set required to be used with the PAXgene Blood RNA tube?
FAQ ID - 3459
表示
Why is a 2-step (and not a 3-step) cycling protocol recommended for Rotor-Gene SYBR Green Kits?
FAQ ID -2122
表示
Why is a 2-step (and not a 3-step) cycling protocol recommended for QuantiFast SYBR Green PCR Kits?
FAQ ID -1450
表示
Why is 18S ribosomal RNA (rRNA) used as a housekeeping gene to normalize sample-to-sample, systematic variation in qPCR assays?
FAQ ID -2675
表示
Why have the hazard symbols accompanying products changed?
FAQ ID - 3430
表示
Why had my RT² SYBR Green Mastermix been working well in the past, but now does not seem to be?
FAQ ID -2717
表示
Why does the upper aqueous phase look pinkish when purifying RNA from fatty tissue?
FAQ ID -3118
表示
Why does the template for EasyXpress Disulfide Insect Kits need to have a signal sequence (such as the mellitin signal sequence as provided by the EasyXpress Linear Template Fab Kit primers)?
FAQ ID -2967
表示
Why does the SeqTarget Prep Protocol require a 2-step procedure?
FAQ ID -2238
表示
Why does the QuantiTect Primer Assay for my gene of interest have only one version number?
FAQ ID -1134
表示
Why does the QIAcube sometimes fail to pick up the tips or pick up wrong tips?
FAQ ID -3131
表示
Why does the QIAamp DNA Mini Tissue Protocol require both ATL and AL buffer, while the Blood Protocol only uses AL?
FAQ ID -633
表示
Why does the miScript Target Protector not induce the degradation process?
FAQ ID -2263
表示
Why does the DNeasy mericon Food Kit use a QIAquick column and Buffer PB rather than a DNeasy column and Buffer AL, which might be expected since the kit isolates genomic DNA?
FAQ ID - 3347
表示
Why does the DNeasy mericon Food extraction kit use a QIAquick column and not DNeasy column?
FAQ ID -3148
表示
Why does the copy function not apply relative to migration time and normalized area values after loading the DNA size marker table and adding the alignment marker peaks on the QIAxcel System?
FAQ ID -1832
表示
Why does the connection test fail?
FAQ ID - 141522
表示
Why does the Allprep DNA/RNA 96 Kit use Buffer RLT, whereas the AllPrep DNA/RNA Mini Kit uses Buffer RLT Plus?
FAQ ID -1999
表示
Why does TA/UA cloning work with your proofreading HotStar HiFidelity DNA Polymerase?
FAQ ID -1053
表示
Why does my realtime PCR assay quality decrease over time?
FAQ ID -589
表示
Why does my purified DNA/RNA sometimes have a 260/280 or 260/230 ratio of more than 2? Does that mean the purity is poor?
FAQ ID -3132
表示
Why does my PCR product show up later when comparing the QuantiTect SYBR Green PCR Kits with Roche kits using the same annealing temperature?
FAQ ID -1083
表示
Why does my isolated RNA have a low OD 260/280 ratio?
FAQ ID -97
表示
Why does my DNA sample float out of the slot when loading it onto an agarose gel?
FAQ ID -205
表示
Why does AllPrep DNA/RNA/Protein Mini kit use buffer RLT, but Allprep DNA/RNA Mini and Allprep DNA/RNA Micro kits use buffer RLT Plus? Are these buffers interchangeable?
FAQ ID - 3391
表示
Why do you recommend using Triton X for the purification of 6xHis-tagged protein?
-100
表示
Why do the Internal Control templates for extraction (Internal Control DNA or RNA [High conc.]) have a 10x higher concentration than the IC templates provided with the QuantiFast Pathogen PCR +IC Kit and the QuantiFast Pathogen RT-PCR +IC Kit?
FAQ ID -2603
表示
Why do replicates in real-time PCR have different plateau heights?
FAQ ID -539
表示
Why do QuantiFast SYBR Green PCR Kits require such a high primer concentration?
FAQ ID -1443
表示
Why do qBiomarker Copy Number PCR Arrays have assays in quadruplicate?
FAQ ID — 3414
表示
Why do pQE-T7 vectors of the QIAgenes E. coli system have an additional UAG amber stop codon?
FAQ ID -2043
表示
Why do my qPCR amplification curves or plots decrease in fluorescence intensity after the saturation phase?
FAQ ID -2689
表示
Why do melting temperatures differ between PCR fragments amplified with QIAGEN's QuantiTect SYBR Green PCR Kits and Roche Kits?
FAQ ID -1084
表示
Why do I sometimes get light blue colonies when using the QIAGEN PCR Cloning Kit?
FAQ ID -603
表示
Why do I see multiple high-intensity peaks in my qPCR dissociation curve at temperatures less than 70 ºC?
FAQ ID -2690
表示
Why do I see low, poor, or sub-standard amplification efficiency in my qRT-PCR assay?
FAQ ID -2695
表示
Why do I observe a CT shift for the Internal Control in some samples in comparison to the CT value for the Internal Control of the dilution series of the Male Control DNA M1?
FAQ ID - 3745
表示
Why do I need to identify my real-time instrument model when placing my order for RT² qPCR Primer Assays?
FAQ ID -2713
表示
Why do I need normalization using Rotor-Gene ScreenClust HRM Software?
FAQ ID -2198
表示
Why do I have wavy DNA bands on my agarose gel?
FAQ ID -2260
表示
Why do I have to use an ACS (Assay Control Set)?
FAQ ID -2933
表示
次ページ
Back to top
Contact QIAGEN
Global contacts
Technical Service
Customer Care
FAQListPage