Ni-NTA Superflow

The binding capacity of both resins is the same: up to 50mg/ ml mg 6xHis-tagged protein per ml of resin (2500 nmol @ ~20 kDa). The difference between them is the bead support, which determines pressure resistance and flow rate:

Ni-NTA Agarose:

• Sepharose CL-6B (bead size 45–165 µm)
• max. volumetric: 0.5–1.0 ml/min
• max. pressure: 2.8 psi/(0.2bar)
• for use with gravity flow only

Ni-NTA Superflow:

• Superflow (bead size 60–160 µm)
• max. volumetric: 20 ml/min
• max. pressure: 140 psi/(10bar)
• for use with gravity flow or FPLC

You can find a detailed comparison table in the Appendix at the back of the QIAexpressionist Handbook under the title 'Ni-NTA Matrices'.

The reuse of Ni-NTA Agarose and Ni-NTA Superflow resins depends on the nature of the sample and should only be performed with identical recombinant proteins. We recommend a maximum of 5 runs per column. After use the resin should be washed for 30 minutes with 0.5 M NaOH. Ni-NTA matrices should be stored in 30% ethanol to inhibit microbial growth.

If the Ni-NTA matrix changes from light blue to brownish-gray, the regeneration procedure described in the Appendix of the QIAexpressionist Handbook in section 'Reuse of Ni-NTA Resin' is recommended.

Compatibility of reagents with Ni-NTA matrices

Yes, please follow either of the QIAGEN Supplementary Protocols:

• 'Manual purification of 6xHis-tagged proteins from E. coli using the Ni-NTA Superflow 96 BioRobot Kit' (QE04)
• 'Manual purification of 6xHis-tagged proteins from E. coli using Ni-NTA Superflow Columns' (QE06)

• Use 10-20 mM imidazole in the lysis and wash buffers (both for native and denaturing conditions). Optimal imidazole concentrations have to be determined empirically.
• Increase the NaCl concentration (up to 2 M) in the purification buffers to reduce the binding of contaminants as a result of nonspecific ionic interactions.
• Add ß-mercaptoethanol (up to 20 mM) to the lysis buffer to prevent copurification of host proteins that may have formed disulfide bonds with the protein of interest during cell lysis.
• Add detergents such as Triton X-100 and Tween 20 (up to 2%), or additives such as glycerol (up to 50%) or ethanol (up to 20%) to reduce nonspecific binding to the matrix due to nonspecific hydrophobic interactions.
• Reduce the amount of Ni-NTA matrix. Low-affinity binding of background proteins will be reduced by matching the total binding capacity of Ni-NTA matrix with the expected amount of 6xHis-tagged protein.

Nonionic detergents such as Triton X-100 (0.1 - 1%) and Tween 20 (up to 2%) can be used to reduce non-specific binding of contaminating proteins due to non-specific hydrophobic or ionic interactions. They will have no effect on the binding of 6xHis-tagged protein to the Ni-NTA resin when used within the recommended concentration range.

Optimal concentrations for these additives to binding and wash buffers should be determined empirically for each purification protocol and protein.

To optimize the expression of a given recombinant protein, a time-course analysis of the level of protein expression in the induced culture is recommended. Intracellular protein content is often a balance between the amount of soluble protein in the cells, the formation of inclusion bodies, and protein degradation. By checking the 6xHis-tagged protein present at various times after induction in the soluble and insoluble fractions, the optimal induction period can be established, and the bacterial culture can be harvested at this time. It may be useful to perform plasmid Mini preparations on culture samples during the time-course to enable monitoring of plasmid (expression construct) maintenance.

Below, you can see an example of a time course of recombinant protein expression using the QIAexpress System. You can find this information also in the Section 'Expression in E. coli' in the QIAexpressionist Handbook. The handbook is an important resource for useful background information and protocols. For instructions on how to isolate protein from the soluble and insoluble fractions of induced cultures please see Protocol 14. "Protein minipreps of 6x His-tagged proteins from E. coli under native conditions" and Protocol 19. "6xHis-tagged protein minipreps under denaturing conditions."

Time course of expression using the QIAexpress System. Expression of 6xHis-tagged DHFR was induced with 1 mM IPTG. Aliquots were removed at the times indicated and purified on Ni-NTA Agarose under denaturing conditions. Proteins were visualized by Coomassie staining. Yields per liter culture were 2.8, 5.5,12.3, 33.8, and 53.9 mg, respectively. ■A Crude cell lysate; ■B purification with Ni-NTA. 1: flow-through, 2 & 3: first and second eluates; M: markers; C: noninduced control.