FAQ ID -2997

FAQ ID -2295

FAQ ID -1856

FAQ ID -9095

FAQ ID -2371

153920

FAQ ID - 9210

FAQ ID - 3889

FAQ ID - 3894

This webinar describes the use of real-time PCR in ingredient authenticity testing with specific reference to the example of detecting pork in manufactured foods. This type of testing could have a role to play in certification of foods and pharmaceuticals as suitable for consumption by particular religious or ethnic groups. Real-time PCR also has applications in the assessment of food quality and safety. Testing facilities have to rule out the use of cheaper "filler" in expensive foodstuffs and show the absence of non-pathogenic organic contaminants in food and animal feed. This webinar provides details on the types of ingredient authenticity testing that can be done using real-time PCR and shows data on the specificity and sensitivity of assays for the detection of pork in manaufactured foods.

An in vitro Nucleic Acid Hybridization Assay with Signal Amplification using Microplate Chemiluminescence for the Qualitative Detection of Human Papillomavirus (HPV) Type6, 11, 16, 18, 31, 33, 35, 39, 42, 43, 44, 45, 51, 52, 56, 58, 59, and 68 and Analysis of HPV DNA Low- and High-Risk Groups in Cervical Specimens: HPV Types 6/11/42/43/44 and
16/18/31/33/35/39/45/51/52/56/58/59/68.

FAQ ID -3000

FAQ ID -562

Focus on Your Pathway

Carsten Hohoff, Institute of Forensic Genetics GmbH, Münster

For use with software version 5.0

For use with software version 5.0

A high-performance computing solution for mapping reads to a reference and de novo assembly of next-generation sequencing data.

QuantiTect Multiplex PCR Kit - with master mix containing ROX passive reference dye QuantiTect Multiplex PCR NoROX Kit - with master mix free of ROX passive reference dye For quantitative, multiplex, real-time PCR and two-step RT-PCR using sequence-specific probes  

For more information about this product, please refer to JAK2 RGQ PCR Kit Handbook (www.qiagen.com/JAK2).

QIAcube HT instrument operating software. This software offers a state-of-the-art user interface and a wizard-guided experimental setup for quick and easy purification experiments.

For software installation instructions, please refer to the QIAcube HT Unpacking and Installation Instructions or to the QIAcube HT User Manual, chapter 4.4.1.

Important: It is not possible to install both QIAcube HT Prep Manager Software and QIAcube HT Operating Software 4.17 on the same computer. Please uninstall QIAcube HT Operating Software 4.17 before installing QIAcube HT Prep Manager Software. For more information, contact QIAGEN Technical Services.

Global effort that coordinates assembly of a standardized reference sequence library for all fish species

QIAcube HT instrument operating software. This software offers a state-of-the-art user interface and a wizard-guided experimental setup for quick and easy purification experiments.

For software installation instructions, please refer to the QIAcube HT Unpacking and Installation Instructions or to the QIAcube HT User Manual, chapter 4.4.1.

Important: It is not possible to install both QIAcube HT Prep Manager Software and QIAcube HT Operating Software 4.17 on the same computer. Please uninstall QIAcube HT Operating Software 4.17 before installing QIAcube HT Prep Manager Software. For more information, contact QIAGEN Technical Services.

Here we present data to demonstrate use of the GeneRead QIAact Actionable Insights Tumor Panel and workflow with reference standard and biological liquid biopsy samples 

Please refer to the PyroMark KRAS v2.0 Handbook

Please refer to the PyroMark KRAS v2.0 Handbook

Please refer to the PyroMark KRAS v2.0 Handbook

QuantiTect Multiplex RT-PCR Kit - with master mix containing ROX passive reference dye QuantiTect Multiplex RT-PCR NR Kit - with master mix free of ROX passive reference dye For gene expression analysis by quantitative, multiplex, real-time one-step RT-PCR using sequence-specific probes

For further information on which version of the v11 template files is suitable for your needs, please refer to the Template File Info Note.

For further information on which version of the v11 template files is suitable for your needs, please refer to the Template File Info Note.

Release of QIAxpert Instrument Software v2.4.3.101. This release includes the latest versions of the following Apps: DNA QIAamp, DNA QIAsymphony, DNA Mammalian, DNA Plant, PCR QIAquick, Purified PCR, RNA RNeasy, RNA, PAXgene RNA, RNA FFPE, A₂₆₀ dsDNA, A₂₆₀ RNA, A₂₆₀ ssDNA, A₂₈₀ Protein, UV/Vis and OD check.

For more information on the installation process, please refer to Section 5.11.1 (Installing New Protocols), of the QIAcube Connect MDx User Manual.

For details on the software changes, please refer to the Software Release Note and "Important Note: QIAcube Connect Software Version 1.3 Update" on this page.

For more information on the installation of language files and translated protocol files, please refer to sections 4.5.1. (System Configurations, Step 7) and 5.11.1 (Installing new protocols) of the QIAcube Connect MDx User Manual. The protocol files have not changed, but after software update to version 1.0.1. IVD, protocol and language files have to be re-loaded.

For more information on the installation of language files and translated protocol files, please refer to sections 4.5.1. (System Configurations, Step 7) and 5.11.1 (Installing new protocols) of the QIAcube Connect MDx User Manual. The protocol files have not changed, but after software update to version 1.0.1. IVD, protocol and language files have to be re-loaded.

For more information on the installation of language files and translated protocol files, please refer to sections 4.5.1. (System Configurations, Step 7) and 5.11.1 (Installing new protocols) of the QIAcube Connect MDx User Manual. The protocol files have not changed, but after software update to version 1.0.1. IVD, protocol and language files have to be re-loaded.

For more information on the installation of language files and translated protocol files, please refer to sections 4.5.1. (System Configurations, Step 7) and 5.11.1 (Installing new protocols) of the QIAcube Connect MDx User Manual. The protocol files have not changed, but after software update to version 1.0.1. IVD, protocol and language files have to be re-loaded.

For more information on the installation of language files and translated protocol files, please refer to sections 4.5.1. (System Configurations, Step 7) and 5.11.1 (Installing new protocols) of the QIAcube Connect MDx User Manual. The protocol files have not changed, but after software update to version 1.0.1. IVD, protocol and language files have to be re-loaded.

To download Rotor-Gene AssayManager v2.1.1 after purchase:

Click the Rotor-Gene AssayManager v2.1.1 Software header. On the next window, click Continue. Follow the on-screen instructions to install Rotor-Gene AssayManager v2.1.1.
Rotor-Gene AssayManager v2.1.1 and license must be purchased prior to use.    

IMPORTANT: In order to perform and analyze runs, at least one Rotor-Gene AssayManager v2.1.1 plug-in needs to be installed. Refer to your assay kit handbook for more information.

IMPORTANT: To allow checksum integrity verification, use the value D24F10DEB7A1D60EE381E2AEA8789117D0980FCC.

To purchase a license key for Rotor-Gene AssayManager v2.1.1:

1. After purchasing Rotor-Gene AssayManager v2.1.1 software and licenses, click the "Download" button and follow the onscreen instructions to install. After successful installation of the Rotor-Gene AssayManager v2.1.1 and a plug-in, a “key file” will be generated. This "key file" will be attached to the "Technical Support Form" in Step 5, below.   
2. Go to the Technical Support Form. Make sure to include all required information and your Rotor-Gene Q or Rotor-Gene Q MDx serial number when filling out the form.       
3. For Question 2, "Type of Request", select “Other”.
4. For Question 4, “Your inquiry”, enter "Rotor-Gene AssayManager license request” and include your purchase order number, from your order confirmation.
5. Include the "key file" from Step 1 as an attachment.
6. Submit the form. QIAGEN Technical Services will respond via email with a license file within 1–2 working days.    
7. After receiving your computer-specific Rotor-Gene AssayManager v2.1.1 license file, archive the license file locally on your computer.

IMPORTANT: The license file must always exist on the computer that has Rotor-Gene AssayManager v2.1.1 installed. The license file location should be protected and not subject to change.

Instrument operating software including the QIAgility Setup Manager Gene Expression, Pathogen Detection, Sample Pooling and Generic PCR plug-in. The software offers a complete solution for qPCR setup, sample normalization, CE loading, certain liquid handling, as well as sample pooling. The Gene Expression and Pathogen Detection plug-ins are optimized for use with QIAGEN gene expression and pathogen detection kits, such as QuantiTect, QuantiFast, QuantiNova and Rotor-Gene kits. The Generic PCR plug-in allows flexible qPCR setup, liquid handling and support for the whole HID workflow.

For software installation instructions, please refer to the QIAgility Unpacking and Installation Instructions or to the QIAgility User Manual, chapter 4.4.

Important: It is not possible to install both QIAgility Setup Manager Software and QIAgility Operating Software 4.18 on the same computer. Please uninstall QIAgility Operating Software 4.18 before installing QIAgility Setup Manager Software. For more information, contact QIAGEN Technical Services.

Version 1.1.2

This is the language package corresponding to the EZ2 Connect software. For more information on the installation process, please refer to Section 5.3.7 (Language Settings) of the EZ2 Connect and EZ2 Connect Fx User Manual.

Version 1.1.2

This is the language package corresponding to the EZ2 Connect software. For more information on the installation process, please refer to Section 5.3.7 (Language Settings) of the EZ2 Connect and EZ2 Connect Fx User Manual.

Version 1.1.2

For more information on the installation process, please refer to Section 5.3.8 (Updating software), of the EZ2 Connect MDx User Manual. This software release contains the same protocols as version 1.1.1. For details on the contained protocol package and the software changes refer to the customer information letter on this page.

Version 8 (old version, compatible with software version 1.1)

For more information on the installation process, please refer to Section 5.3.6. (Installing New Protocols), of the EZ2 Connect and EZ2 Connect Fx User Manual.

Version 8 (old version, compatible with software version 1.1)

For more information on the installation process, please refer to Section 5.3.6. (Installing New Protocols), of the EZ2 Connect MDx User Manual.

This package contains protocols in version 5 for the EZ1 DSP Virus Kit and in version 7 for the EZ1 DSP DNA Blood Kit. Since launch of the EZ2 Connect MDx instrument, there was no change in the DSP protocols for diagnostic use.

For details on the changes, refer to "Release Note: EZ2 Connect MDx Protocol Package".

Version 1.2.0

For more information on the installation process, please refer to Section 5.3.8 (Updating software) of the EZ2 Connect and EZ2 Connect Fx User Manual.

Version 1.2.0

For more information on the installation process, please refer to Section 5.3.8 (Updating software) of the EZ2 Connect MDx User Manual.

For details on the software changes, please refer to Important Note: Known Bugs ScreenGel V2.1 and Important Note: Use of Thermo Scientific Marker GeneRuler 1 kb DNA-Ladder with QIAxcel ScreenGel.

Version 8 (old version, compatible with software version 1.1)

Note: Unzip the folder prior to installation on the EZ2 Connect instrument, and install the *.ez2u file only.

For more information on the installation process, please refer to Section 5.3.6. (Installing New Protocols), of the EZ2 Connect and EZ2 Connect Fx User Manual.

Version 10 

Note: Unzip the folder prior to installation on the EZ2 Connect instrument, and install the *.ez2u file only.

For more information on the installation process, please refer to Section 5.3.6 (Installing New Protocols) of the EZ2 Connect and EZ2 Connect Fx User Manual.

Version 10 

Note: Unzip the folder prior to installation on the EZ2 Connect MDx instrument, and install the *.ez2u file only.

For more information on the installation process, please refer to Section 5.3.6. (Installing New Protocols), of the EZ2 Connect MDx User Manual.

This package contains protocols in version 5 for the EZ1 DSP Virus Kit and in version 7 for the EZ1 DSP DNA Blood Kit. Since launch of the EZ2 Connect MDx instrument, there was no change in the DSP protocols for diagnostic use.

For details on the changes, refer to "Release Note: EZ2 Connect MDx Protocol Package".

For more information on the software changes and the installation process, please refer to the customer information letter which can be found on the QIAcube Connect MDx product page under the "Technical Information and Important Notes" tab of section "Resources".

The QIAcuity backup and restore scripts are a standalone solution to backup all relevant user data of the QIAGEN Software Suite for disaster recovery and to restore the data on a new or existing QIAGEN Software Suite installation. The backup supports the QIAcuity Software Suite version 2.5 and can be conducted manually or automatically by using of the Windows Task Scheduler.

Note: Windows Admin permission is needed to setup and perform an automated backup and for manual backup and restore.

For backup and restore of Software versions lower than 2.5, please refer to the QIAcuity Software Suite Backup and Restore Scripts for version 2.0, 2.1.7, 2.1.8, and 2.2. 

Note: Windows Admin permission is needed to setup and perform an automated backup and for manual backup and restore.

Please read the QIAcuity Software Suite Backup and Restore Scripts document for more information and instructions how to use the scripts.

 

 

The QIAcuity backup and restore scripts are a standalone solution to backup all relevant user data of the QIAGEN Software Suite for disaster recovery and to restore the data on a new or existing QIAGEN Software Suite installation. The backup supports the QIAcuity Software Suite version 3.0 and can be conducted manually or automatically by using of the Windows Task Scheduler.

Note: Windows Admin permission is needed to setup and perform an automated backup and for manual backup and restore.

For backup and restore of Software versions lower than 2.5, please refer to the QIAcuity Software Suite Backup and Restore Scripts for version 2.0, 2.1.7, 2.1.8, and 2.2.

For backup and restore of Software version 2.5, please refer to the QIAcuity Software Suite Backup and Restore Scripts for QIAcuity Software Suite 2.5 version 2

Note: Windows Admin permission is needed to setup and perform an automated backup and for manual backup and restore.

Please read the QIAcuity Software Suite Backup and Restore Scripts document for more information and instructions how to use the scripts.

 

For more information on the software changes and the installation process, please refer to the Software Release Note on this page.

Predesigned assays for quantification of CpG methylation by Pyrosequencing

For multiplex amplification of FGA (FIBRA), SE33 (ACTBP2), and Amelogenin

Predesigned assays for quantification of CpG methylation by Pyrosequencing

For detection of human papillomavirus infections

FAQ ID -2414

For high-throughput, automated PCR applications

Download Safety Data Sheets for QIAGEN product components.