Products
QIAcube HT Plasticware
Cat. No. / ID: 950067
Plasticware for 480 typical preps on QIAcube HT:
5 S-Blocks, 5 Elution Microtubes RS (EMTR), 120 x 8-Well Strip Caps for EMTR, 9 x 96 Filter-Tips OnCor C, TapePad
Carbon filter
Cat. No. / ID: 9019483
Replacement cartridge (one filter)
Adapter, Reagent Trough R1 Position Plate
Cat. No. / ID: 9019513
For holding combinations of 70 ml and 170 ml Reagent Troughs (cat. nos. 990554, 990556) in the R1 position on the instrument worktable
Accessories Pack, QXT
Cat. No. / ID: 9022649
For upgrading QIAxtractor instruments to process dedicated QIAcube HT kits: Transfer Carriage, Riser Block EMTR, and Channeling Adapter
Adapter, Reagent Trough SBS Plate
Cat. No. / ID: 9018935
For holding combinations of 70 ml and 170 ml Reagent Troughs (cat. nos. 990554, 990556) in the SBS-standard plate position on the instrument worktable
Filter-Tips, OnCor C, 200 µl (10 x 96)
Cat. No. / ID: 990610
Disposable filter-tips; for use with QIAcube HT and QIAxtractor
Elution Microtubes RS (24 x 96)
Cat. No. / ID: 120008
Elution Microtubes RS (EMTR) for use with QIAcube HT: 24 x 96 Elution Microtubes in racks of 96; includes strip caps
Polycap filter
Cat. No. / ID: 9019488
Replacement cartridge (one filter)
HEPA filter
Cat. No. / ID: 9019486
Replacement cartridge (one filter)
Tip Disposal Box Holder
Cat. No. / ID: 9243592
Holds the tip disposal box in place and ensures correct positioning under the tip chute; suitable for QIAcube HT, QIAxtractor, and QIAgility instruments
Tape Pads (5)
Cat. No. / ID: 19570
Adhesive tape sheets for sealing multiwell plates and blocks: 25 sheets in 1 bag and 125 sheets in 1 bag
Reagent Trough (with lid), 170 ml
Cat. No. / ID: 990556
Box of 20 plus lid; liquid reservoirs; used with Reagent Trough R1 Position Plate and Reagent Trough SBS Plate.
Reagent Trough (with lid), 70 ml
Cat. No. / ID: 990554
Box of 10 plus lid; liquid reservoirs; used with Reagent Trough R1 Position Plate and Reagent Trough SBS Plate. For use with QIAgility Operating Software version 4.17.1 only.
S-Blocks (24)
Cat. No. / ID: 19585
96-well blocks with 2.2 ml wells, 24 per case
Tip Disposal Box
Cat. No. / ID: 990550
Box of 10; plastic waste collection box with secure-fitting lid to fit tip ejector chute
Product Details
QIAcube HT Accessories and Consumables are for use with QIAcube HT instruments and provide simple and reliable mid- to high-throughput nucleic acid purification in 96-well format from a range of starting sample materials.
Resources
User-Developed Protocols (1)
Kit Handbooks (1)
Technical Information (2)
Operating Software (1)
Safety Data Sheets (1)
Certificates of Analysis (1)
FAQ
Can I run the QIAcube HT with the QIAxtractor software or vice versa?
For what batch size is the QIAcube HT Plasticware designed?
Can I upgrade a Corbett CAS-1820 to a QIAcube HT?
What file is required for reporting a QIAcube HT or QIAxtractor issue?
I am getting vacuum errors on my QIAcube HT. What should I do?
1. Check the vacuum tubing to make sure it is not pinched or obstructed in some way. Sometimes the tubing can become pinched against the bench top when the vacuum station is placed too far from the instrument.
2. Make sure that the channeling adapter is properly placed. Check if the carriage is moving the plate completely from the waste chamber position to the elution chamber position. If the calibration seems incorrect, the instrument may need to be re-taught at this position.
3. When using less than a full plate, make sure all the unused columns are covered with an adhesive seal.
Also, make sure each column of 8 samples is full. When processing a number of samples that results in < 8 samples per column, use water as a substitute in the empty positions until the column is filled. This ensures even vacuum across all unsealed well positions.
4. Make sure correct plates are used for the selected protocol.
5. When the vacuum is on, please listen for any hissing noise from the tubing that is coming down to the waste container. This could indicate leaks in the tubing.
If the issue persists, please contact QIAGEN Technical Service.
FAQ ID -9106
What do I do if the QIAcube HT or QIAxtractor software runs in virtual mode while the instrument is connected to the computer?